CORDELE, GA —
OSHA Inspection: GFMCO LLC
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of GFMCO LLC in 402 GEORGE MATTHEWS DRIVE, CORDELE, GA 31015 (NAICS 331511). OSHA activity number 344310313.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- GFMCO LLC
- Site address
- 402 GEORGE MATTHEWS DRIVE
- City
- CORDELE
- State
- GA
- ZIP
- 31015
- Mailing
- 600 12TH STREET, COLUMBUS, GA 31902
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 331511
- Employees
- 175
- Ownership type
- A
Citations
9 citations on file for this inspection.
1910.146 C05 II C
- Issued
- Mar 10, 2020
- Abate by
- Apr 3, 2020
- Penalty
- Initial $10,931 · Current $5,466 Reduced
General-duty citation text
29 CFR 1910.146(c)(5)(ii)(C): Employees entered into permit spaces that met the conditions set forth in 29 CFR 1910.146(c)(5)(i) but before an employee entered the space, the internal atmosphere was not tested with a calibrated direct-reading instrument. (a) In the molding machine pit, on or about September 11, 2019, and at times prior to, the employer did not ensure that the internal atmosphere of the pit was tested, with a calibrated direct-reading instrument, before an employee entered the space, thereby exposing employees to respiratory hazards.
Recent events (2)
- — I (S) $5465.5
- — Z (S) $10931
1910.146 C05 II H
- Issued
- Mar 10, 2020
- Abate by
- Apr 3, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.146(c)(5)(ii)(H): Employees entered into permit spaces that met the conditions set forth in 29 CFR 1910.146(c)(5)(i), but a written certification was not made before entry that the measures required by 29 CFR 1910.146(c)(5)(ii) had been taken. (a) In the molding machine pit, on or about September 11, 2019, and at times prior to, the employer did not ensure that written certification was made before an employee entered the confined space, thereby exposing employees to respiratory and energized mechanical equipment hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.146 D06
- Issued
- Mar 10, 2020
- Abate by
- Apr 3, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.146(d)(6): Under the permit-required confined space program required by 29 CFR 1910.146(c)(4), the employer did not provide at least one attendant outside the permit space into which entry was authorized for the duration of entry operations: (a) In the molding machine pit, on or about September 11, 2019, and at times prior to, the employer did not ensure that at least one attendant was present outside the permitted space into which entry was authorized for the duration of entry operations, thereby exposing employees to hazard associated with timely emergency rescue.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.146 D09
- Issued
- Mar 10, 2020
- Abate by
- May 1, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.146(d)(9): The employer did not develop and implement procedures for summoning rescue and emergency services, for rescuing entrants from permit spaces, for providing necessary emergency services to rescued employees, and/or for preventing unauthorized entry. (a) In the molding machine pit, on or about September 11, 2019, and at times prior to, the employer did not develop and implement procedures for summoning rescue and emergency services for rescuing entrants from the space before an employee entered the space, thereby preventing a timely and safe rescue of employees in the event of an emergency.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.146 D14
- Issued
- Mar 10, 2020
- Abate by
- Apr 3, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.146(d)(14): Under the permit-required confined space program required by 29 CFR 1910.146(c)(4), the employer did not review the permit-required confined space program, using the canceled permits retained under 29 CFR 1910.146(e)(6) within one year. (a) In the molding machine pit, on or about September 11, 2019, and at times prior to, the employer had not reviewed the permit-required confined space program to ensure that employees participating in entry operations are protected from permit space hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.146 E01
- Issued
- Mar 10, 2020
- Abate by
- Apr 3, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.146(e)(1): Before entry was authorized, the employer did not document the completion of measures required by 29 CFR 1910.146(d)(3) by preparing an entry permit: (a) In the molding machine pit, on or about September 11, 2019, and at times prior to, the employer did not ensure that entry permits were being completed before employees entered the permit-required confined space, thereby exposing employees to confined space hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.146 G01
- Issued
- Mar 10, 2020
- Abate by
- Apr 3, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.146(g)(1): The employer did not provide training so that all employees whose work was regulated by 29 CFR 1910.146 (permit required confined spaces) acquired the understanding, knowledge, and skills necessary for the safe performance of the duties assigned under 29 CFR 1910.146: (a) In the molding machine pit, on or about September 11, 2019, and at times prior to, the employer did not provide effective training to ensure employees entering the confined space acquired the understanding, knowledge, and skills necessary for the safe performance of the duties assigned to them while working in the confined space, thereby exposing them to confined space hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.146 L01
- Issued
- Mar 10, 2020
- Abate by
- Apr 3, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.146(l)(1): Employers shall consult with affected employees on the development and implementation of all aspects of the permit-required confined space program required by paragraph (c) of this section. (a) In the molding machine pit, on or about September 11, 2019, and at times prior to, the employer did not consult with affected employees on the development and implementation of all aspects of the permit-required confined space program before employees entered the space, thereby exposing employees to confined space hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.22 A01
- Issued
- Mar 10, 2020
- Abate by
- Apr 3, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.22(a)(1): All places of employment, passageways, storerooms, service rooms, and walking-working surfaces were not kept in a clean, orderly, and sanitary condition: (a) Inside the electrical panel room in the central molding area, on or about September 11, 2019, and at times prior to, the employer did not ensure that walking-working surfaces were free of clutter and maintained in a clean, orderly, and sanitary condition, thereby exposing employees to trip hazards. (b) in the storage area along the west side of the production area and on the upper levels of the molding area, on or about September 11, 2019, and at times prior to, the employer did not ensure that walking-working surfaces were free of dust buildup and maintained in a clean, orderly, and sanitary condition, thereby exposing employees to slip and trip hazards.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Gfmco LLC
View Gfmco LLC's full OSHA safety record →
More inspections in this industry (NAICS 331511)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344310313.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.