BEARDSTOWN, IL —
OSHA Inspection: CRATE AND PALLET PACKAGING COMPANY, LLC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of CRATE AND PALLET PACKAGING COMPANY, LLC in 9416 IL ROUTE 125, BEARDSTOWN, IL 62618 (NAICS 321920). OSHA activity number 344313390.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CRATE AND PALLET PACKAGING COMPANY, LLC
- Site address
- 9416 IL ROUTE 125
- City
- BEARDSTOWN
- State
- IL
- ZIP
- 62618
- Mailing
- 9416 IL ROUTE 124, BEARDSTOWN, IL 62618
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321920
- Employees
- 40
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.22 A01
- Issued
- Dec 27, 2019
- Abate by
- Jan 14, 2020
- Penalty
- Initial $5,834 · Current $0 Reduced
General-duty citation text
29 CFR 1910.22(a)(1): All places of employment, passageways, storerooms, service rooms, and walking-working surfaces must be kept in a clean, orderly, and sanitary condition: On or about September 17, 2019, employees were exposed to slips and falls while working in the facility because sawdust was allowed to accumulate on the floor.
Recent events (2)
- — I (O) $0
- — Z (S) $5834
1910.28 B01 I
- Issued
- Dec 27, 2019
- Abate by
- Jan 14, 2020
- Penalty
- Initial $7,293 · Current $5,105 Reduced
General-duty citation text
29 CFR 1910.28(b)(1)(i): The employer did not ensure that each employee on a walking-working surface with an unprotected side or edge that is 4-feet (1.2 m) or more above a lower level is protected from falling by a guardrail system, safety net system, or personal fall protection system: On or about September 17, 2019, an employee was exposed to a fall hazard of approximately 5 feet while accessing the top of the Destroyer Shredding Machine and fall protection was not being used.
Recent events (2)
- — I (S) $5105
- — Z (S) $7293
1910.212 A01
- Issued
- Dec 27, 2019
- Abate by
- Jan 14, 2020
- Penalty
- Initial $7,293 · Current $5,105 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: On or about September 17, 2019, employees were exposed to machine hazards associated with moving parts while working near the Destroyer Shredder Machine and a suitable guard was not in place to protect the employees from the rotating belt.
Recent events (2)
- — I (S) $5105
- — Z (S) $7293
1910.213 H01
- Issued
- Dec 27, 2019
- Abate by
- Jan 14, 2020
- Penalty
- Initial $10,210 · Current $0 Reduced
General-duty citation text
29 CFR 1910.213(h)(1): Radial saw(s) did not have an upper hood that completely enclosed the upper portion of the blade down to a point including the end of the saw arbor: On or about September 17, 2019, an employee was exposed to amputation hazards while using the dewalt radial arm saw because the blade was not guarded.
Recent events (2)
- — I (O) $0
- — Z (S) $10210
1910.213 R04
- Issued
- Dec 27, 2019
- Abate by
- Jan 14, 2020
- Penalty
- Initial $10,210 · Current $7,140 Reduced
General-duty citation text
29 CFR 1910.213(r)(4): Suitable guard(s) were not provided to reduce to a minimum the hazard due to the point of operation of the exposed saw blade: On or about September 17, 2019, an employee was exposed to amputation hazards while using the dismantler saw to cut wooden pallets because the blade was not guarded.
Recent events (2)
- — I (S) $7140
- — Z (S) $10210
More inspections at Crate and Pallet Packaging Company, LLC
View Crate and Pallet Packaging Company, LLC's full OSHA safety record →
More inspections in this industry (NAICS 321920)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344313390.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.