Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: OHIO VALLEY VENEER INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of OHIO VALLEY VENEER INC. in NO. 1 KY RT 2541, GREENUP, KY 41144 (NAICS 488310). OSHA activity number 344319843.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Ohio Valley Veneer INC. — free Get an email when a new federal OSHA severe-injury report for Ohio Valley Veneer INC. is published. One employer, no account, unsubscribe in one click.
Site address
NO. 1 KY RT 2541
City
GREENUP
State
KY
ZIP
41144
Mailing
165 NO NAME RD., PIKETON, OH 45661
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
488310
Employees
9
Ownership type
A

6 citations on file for this inspection.

1910.28 B01 I

Serious Gravity 5 1 instance 2 exposed
Issued
Nov 14, 2019
Penalty
Initial $8,525 · Current $8,525
29 CFR 1910.28(b)(1)(i): The employer did not ensure that each employee on a walking-working surface with an unprotected side or edge that is 4 feet (1.2 m) or more above a lower level is protected from falling by one or more of the following, a guardrail system.  a) Lumber Yard "Temple" - conveyor platform located at No 1, KY RT 2541, Greenup, KY.  On or about 17 Sep 2019, the chain guardrail was not installed exposing workers to a fall hazard.
Recent events (1)
  • — Z (S) $8525

1910.212 A01

Serious Gravity 5 3 instances 1 exposed
Issued
Nov 14, 2019
Penalty
Initial $8,525 · Current $8,525
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are-barrier guards, two-hand tripping devices, electronic safety devices, etc.  a) Lumber Yard "Temple", located at No 1, KY RT 2541, Greenup, KY.  On or about 17 Sep 2019, the barrier guard on the conveyor belt motor was damaged creating large openings on three sides exposing workers to rotating parts and pinch-point hazards.
Recent events (1)
  • — Z (S) $8525

1910.305 B02 I

Serious Gravity 5 1 instance 2 exposed
Issued
Nov 14, 2019
Penalty
Initial $8,525 · Current $8,525
29 CFR 1910.305(b)(2)(i): All pull boxes, junction boxes, and fittings shall be provided with covers identified for the purpose. In completed installations, each outlet box shall have a cover, faceplate, or fixture canopy.   a) Lumber Yard "Temple" - walkway, located at No 1, KY RT 2541, Greenup, KY.  On or about 17 Sep 2019, The electrical outlet providing power to the pump heater did not have a cover exposing energized parts.   b) Lumber Yard "Temple" - walkway, located at No 1, KY RT 2541, Greenup, KY. On or about 17 Sep 2019, The electrical switch used to turn the heater for the pump did not have a cover exposing energized live parts.  c) Lumber Yard "Temple" - walkway, located at No 1, KY RT 2541, Greenup, KY.  On or about 17 Sep 2019, The relay switches for the pump was missing the cover exposing energized live parts.
Recent events (1)
  • — Z (S) $8525

1917.112 B01

Serious Gravity 5 1 instance 2 exposed
Issued
Nov 14, 2019
Penalty
Initial $8,525 · Current $8,525
29 CFR 1917.112(b)(1): Guardrails were not  provided at locations where employees are exposed to floor or wall openings or waterside edges, including bridges or gangway-like structures leading to pilings or vessel mooring or berthing installations, which present a hazard of falling more than 4 feet (1.22 m) or into the water.  a) Lumber Yard "Temple" loading platform, located at No 1, KY RT 2541, Greenup, KY.  On or about 17 Sep 2019, the chain at the top of the fixed ladder was not installed exposing workers to fall hazard.
Recent events (1)
  • — Z (S) $8525

1910.305 G01 IV B

Other-than-serious 1 instance 3 exposed
Issued
Nov 14, 2019
Penalty
Initial $0 · Current $0
29 CFR 1910.305(g)(1)(iv)(B): Unless specifically permitted otherwise in paragraph (g)(1)(ii) of this section, flexible cords and cables may not be used to run through holes in walls, ceilings, or floors.  a) Weigh station/office trailer - rear storage room, located at No 1, KY RT 2541, Greenup, KY.  On or about 17 Sep 2019, a flexible cord was run through the wall and a metal receptacle box and plugged into an outlet receptacle on south wall.
Recent events (1)
  • — Z (O) $0

1910.1200 G08

Other-than-serious 1 instance 2 exposed
Issued
Nov 14, 2019
Abate by
Nov 21, 2019
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(g)(8): The employer did not maintain in the workplace copies of the required safety data sheets for each hazardous chemical, and shall ensure that they are readily accessible during each work shift to employees when they are in their work area(s).  a) Weigh station trailer, located at No 1, KY RT 2541, Greenup, KY.  On or about 17 Sep 2019, Safety Data Sheets (SDS) were not maintain for the chemicals used in the workplace exposing workers to unknown chemical hazards.
Recent events (1)
  • — Z (O) $0

View Ohio Valley Veneer INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344319843.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.