Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: NATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION, POINT ADAMS SHOP FACILITY

Planned inspection · Health discipline

On , OSHA opened a planned health inspection of NATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION, POINT ADAMS SHOP FACILITY in 200 LAKE DRIVE, HAMMOND, OR 97121 (NAICS 924120). OSHA activity number 344357330.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch National Oceanic and Atmospheric Administration, Point Adams Shop Facility — free Get an email when a new federal OSHA severe-injury report for National Oceanic and Atmospheric Administration, Point Adams Shop Facility is published. One employer, no account, unsubscribe in one click.
Site address
200 LAKE DRIVE
City
HAMMOND
State
OR
ZIP
97121
Mailing
PO BOX 155, HAMMOND, OR 97121
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
924120
Employees
1
Ownership type
D

4 citations on file for this inspection.

1910.1200 E01

Other-than-serious 1 instance 1 exposed
Issued
Jan 10, 2020
Abate by
Feb 25, 2020
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and maintain at each workplace, a written hazard communication program which at least describes how the criteria specified in paragraphs (f), (g), and (h) of this section for labels and other forms of warning, safety data sheets, and employee information and training will be met, and which also includes the following:  a)   Employees working in the boat repair shop do not have a written Hazard Communication Program to use as guidance when performing tasks that require the use of materials or products such as lube oil and adhesives.
Recent events (1)
  • — Z (O) $0

1910.132 D01

Other-than-serious 1 instance 1 exposed
Issued
Jan 10, 2020
Abate by
Feb 25, 2020
Penalty
Initial $0 · Current $0
29 CFR 1910.132(d)(2): The employer did not verify that the required workplace hazard assessment had been performed through a written certification that identifies the workplace evaluated; the person certifying that the evaluation has been performed; the date(s) of the hazard assessment; and, which identifies the document as a certification of hazard assessment.  a)  The employer did not complete a written hazard assessment for the different tasks performed in the boat repair shop for the employees that used personal protective equipment such as but not limited to face shields, leather gloves and welding hoods they may wear when welding, or doing other repair tasks.
Recent events (1)
  • — Z (O) $0

1910.134 D01 III

Other-than-serious 1 instance 4 exposed
Issued
Jan 10, 2020
Abate by
Feb 25, 2020
Penalty
Initial $0 · Current $0
29 CFR 1910.134(d)(1)(iii): The employer did not identify and evaluate the respiratory hazard(s) in the workplace; including a reasonable estimate of employee exposures to respiratory hazards and identification of the contaminant's chemical state and physical form  a) Employees working in the boat repair shop performed work such as but not limited to, grinding metal, and they wear 3M model 8210 for comfort from breathing metal dust as needed.
Recent events (1)
  • — Z (O) $0

1910.134 K06

Other-than-serious 1 instance 5 exposed
Issued
Jan 10, 2020
Penalty
Initial $0 · Current $0
29 CFR 1910.134(k)(6): The employer did not provide the basic advisory information on respirators, as presented in Appendix D of 29 CFR 1910.134, in written or oral format to employees who wear respirators when such use was not required by the employer:  a) Employees working in the boat repair shop performed work such as but not limited to grinding metal and  they wear 3M model 8210 for comfort from breathing metal dust as needed.
Recent events (1)
  • — Z (O) $0

View National Oceanic and Atmospheric Administration, Point Adams Shop Facility's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344357330.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.