ERIE, PA —
OSHA Inspection: ERIE STRAYER COMPANY
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of ERIE STRAYER COMPANY in 1851 RUDOLPH AVENUE, ERIE, PA 16502 (NAICS 333120). OSHA activity number 344385315.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ERIE STRAYER COMPANY
- Site address
- 1851 RUDOLPH AVENUE
- City
- ERIE
- State
- PA
- ZIP
- 16502
- Mailing
- P.O. BOX 1031, ERIE, PA 16512
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333120
- Employees
- 84
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.176 B
- Issued
- Apr 13, 2020
- Abate by
- May 7, 2020
- Penalty
- Initial $7,570 · Current $3,500 Reduced
General-duty citation text
29 CFR 1910.176(b): Storage of material created a hazard: A.) Erie Strayer Company, 1851 Rudolph Avenue, Erie, PA 16502, Pre-Fabrication Department (Department 50), I-beam drop staging area, west end of the building, on or about October 15, 2019 and times prior there to: I-beams were being stacked flange-on-flange three tiers high, and were not stacked in an interlocking fashion to prevent collapse. An employee sustained a left tibia/fibula fracture when an I-beam that was being hoisted came into contact with the conveyor, kicked-out, and impacted the stack. The I-beam from the stack fell onto the employee's left leg. B.) Erie Strayer Company, 1851 Rudolph Avenue, Erie, PA 16502, Pre-Fabrication Department (Department 50), I-beam drop staging area, west end of the building, on or about October 17, 2019 and times prior there to: I-beams were being stacked flange-on-flange two and three tiers high, and were not stacked in an interlocking fashion to prevent collapse. A total of at least 3 separate stacks were stored in this manner. The condition exposed employees to potential struck-by hazards. ABATEMENT CERTIFICATION REQUIRED: Abatement certification is required within 10 days after the abatement date noted on the citation (see below). This certification shall include a statement that abatement is complete, the date abatement was completed, method of abatement, and state that employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $3500
- — Z (S) $7570
1910.179 N03 III B
- Issued
- Apr 13, 2020
- Abate by
- May 7, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.179(n)(3)(iii)(b): During hoisting, the load contacted obstructions: A.) Erie Strayer Company, 1851 Rudolph Avenue, Erie, PA 16502, Pre-Fabrication Department (Department 50), I-beam drop staging area, west end of the building, on or about October 15, 2019 and times prior there to: An employee sustained a left tibia/fibula fracture when an I-beam that was being hoisted came into contact with the conveyor, kicked-out, and impacted a stack of I-beams that were stacked flange-on-flange, three tiers high. The I-beam from the stack fell onto the employee's left leg. ABATEMENT CERTIFICATION REQUIRED: Abatement certification is required within 10 days after the abatement date noted on the citation (see below). This certification shall include a statement that abatement is complete, the date abatement was completed, method of abatement, and state that employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.184 C08
- Issued
- Apr 13, 2020
- Abate by
- May 7, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.184(c)(8): Load(s) suspended by sling(s) were not kept clear of obstructions: A.) Erie Strayer Company, 1851 Rudolph Avenue, Erie, PA 16502, Pre-Fabrication Department (Department 50), I-beam drop staging area, west end of the building, on or about October 15, 2019 and times prior there to: An employee sustained a left tibia/fibula fracture when an I-beam that was being hoisted came into contact with the conveyor, kicked-out, and impacted a stack of I-beams that were stacked flange-on-flange, three tiers high. The I-beam from the stack fell onto the employee's left leg. ABATEMENT CERTIFICATION REQUIRED: Abatement certification is required within 10 days after the abatement date noted on the citation (see below). This certification shall include a statement that abatement is complete, the date abatement was completed, method of abatement, and state that employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at Erie Strayer Company
View Erie Strayer Company's full OSHA safety record →
More inspections in this industry (NAICS 333120)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344385315.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.