PAWTUCKET, RI —
OSHA Inspection: KEY CONTAINER CORPORATION
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of KEY CONTAINER CORPORATION in 21 CAMPBELL STREET, PAWTUCKET, RI 02861 (NAICS 322211). OSHA activity number 344415559.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- KEY CONTAINER CORPORATION
- Site address
- 21 CAMPBELL STREET
- City
- PAWTUCKET
- State
- RI
- ZIP
- 02861
- Mailing
- P.O. BOX 2370, PAWTUCKET, RI 02861
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 322211
- Employees
- 110
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.212 A01
- Issued
- Nov 19, 2019
- Abate by
- Jan 7, 2020
- Penalty
- Initial $8,525 · Current $4,263 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, and/or flying chips and sparks: (a) Worksite - Maintenance Department: On or about 10/30/2019, the employer did not ensure that chuck guards were installed on the South Bend and LeBlond lathe machines.
Recent events (2)
- — I (S) $4262.5
- — Z (S) $8525
1910.212 B
- Issued
- Nov 19, 2019
- Abate by
- Jan 7, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.212(b): Machine(s) designed for fixed location(s) were not securely anchored to prevent walking or moving: (a) Worksite - Maintenance Department: On or about 10/30/2019, the employer did not ensure that the Delta drill press was secured from walking and movement.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.215 A04
- Issued
- Nov 19, 2019
- Abate by
- Nov 29, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(a)(4): Grinding machinery was not used with work rest(s) to support offhand grinding work. Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one-eighth inch: (a) On or about 10/30/2019, the employer did not ensure that the Milwaukee bench grinder had its work rests adjusted to within one-eighth inch of the grinding wheel. (b) On or about 10/30/2019, the employer did not ensure that the Westward wall mounted grinder had work rests to support offhand grinding work.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.215 B09
- Issued
- Nov 19, 2019
- Abate by
- Nov 29, 2019
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one-fourth inch: (a) Worksite - Maintenance Department: On or about 10/30/2019, the employer did not ensure that the tongue guards on the Milwaukee and Westward grinders were adjusted to within one-fourth inch of the grinding wheel.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 C06 I
- Issued
- Nov 19, 2019
- Abate by
- Jan 7, 2020
- Penalty
- Initial $957 · Current $479 Reduced
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: (a) Worksite: On or about 10/30/2019, the employer did not ensure that the machine specific energy control procedures for Lockout/Tag-out were inspected annually.
Recent events (2)
- — I (O) $478.5
- — Z (O) $957
More inspections at KEY Container Corporation
View KEY Container Corporation's full OSHA safety record →
More inspections in this industry (NAICS 322211)
More inspections in RI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344415559.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.