Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: UNITED ERECTORS 2, LLC

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of UNITED ERECTORS 2, LLC in 1751 CR 282, LIBERTY HILL, TX 78642 (NAICS 238120). OSHA activity number 344432547.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch United Erectors 2, LLC — free Get an email when a new federal OSHA severe-injury report for United Erectors 2, LLC is published. One employer, no account, unsubscribe in one click.
Site address
1751 CR 282
City
LIBERTY HILL
State
TX
ZIP
78642
Mailing
5504 BANDERA RD STE 402, SAN ANTONIO, TX 78238
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238120
Employees
15
Ownership type
A

4 citations on file for this inspection.

1926.602 C01 II

Serious Gravity 5 1 instance 1 exposed
Issued
Jan 14, 2020
Abate by
Jan 21, 2020
Penalty
Initial $3,789 · Current $3,789
29 CFR 1926.602(c)(1)(ii): Modifications or additions affecting the safe operation of the equipment were made without the manufacturer's written approval: Note:  If such modifications or changes are made, the capacity, operation, and maintenance instruction plates, tags, or decals shall be changed accordingly:  On or about November 6, 2019, and at times prior thereto, employees were using a personnel platform to install metal sheet siding on the steel building under construction without the manufacturer's written approval, exposing employees to a fall hazard.
Recent events (1)
  • — Z (S) $3789

1926.451 C02 IV

Serious Gravity 5 1 instance 1 exposed
Issued
Jan 14, 2020
Abate by
Jan 21, 2020
Penalty
Initial $0 · Current $0
29 CFR 1926.451(c)(2)(iv): Front-end loaders and similar pieces of equipment were used to support scaffold platforms without being specifically designed by the manufacturer for such use:  On or about November 6, 2019, and at times prior thereto, employees were using a personnel platform to install metal sheet siding on the steel building under construction without being specifically designed by the manufacturer, exposing employees to a fall hazard.
Recent events (1)
  • — Z (S) $0

1910.178 L06

Other-than-serious 1 instance 1 exposed
Issued
Jan 14, 2020
Abate by
Feb 3, 2020
Penalty
Initial $0 · Current $0
29 CFR 1910.178(l)(6): The employer did not certify that each operator has been trained and evaluated as required by this paragraph (l):  On or about November 6, 2019, and at times prior thereto, the employer did not maintain documentation and did not certify forklift operator training.
Recent events (1)
  • — Z (O) $0

1926.451 C02 V

Repeat Gravity 5 1 instance 1 exposed
Issued
Jan 14, 2020
Abate by
Jan 21, 2020
Penalty
Initial $7,578 · Current $7,578
29 CFR 1926.451(c)(2)(v): Fork-lifts were used to support scaffold platforms where the entire platform was not attached to the fork.  On or about November 6, 2019, and at times prior thereto, employees were using a personnel work platform to install metal sheet siding on the steel building under construction without the entire platform attached to the fork, exposing employees to a fall hazard.  The United Erectors 2, LLC company was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1926.451(c)(2)(v) which was contained in OSHA inspection number 1193936, citation number 1, item number 2 and was affirmed as a final order on March 7, 2017, with respect to a workplace located at 7022 S. New Braunfels Ave. San Antonio, TX 78238.
Recent events (1)
  • — Z (R) $7578

View United Erectors 2, LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344432547.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.