Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: ABSOLUTE WELDING & CONSULTING, LLC

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of ABSOLUTE WELDING & CONSULTING, LLC in 2484 BRIGHT STAR RD, DOUGLASVILLE, GA 30135 (NAICS 332312). OSHA activity number 344513940.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Absolute Welding & Consulting, LLC — free Get an email when a new federal OSHA severe-injury report for Absolute Welding & Consulting, LLC is published. One employer, no account, unsubscribe in one click.
Site address
2484 BRIGHT STAR RD
City
DOUGLASVILLE
State
GA
ZIP
30135
Mailing
2484 BRIGHT STAR RD, DOUGLASVILLE, GA 30135
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332312
Employees
6
Ownership type
A

5 citations on file for this inspection.

1904.39 A02

Other-than-serious 1 instance 1 exposed
Issued
Feb 25, 2020
Penalty
Initial $2,458 · Current $1,475 Reduced
29 CFR 1904.39(a)(2): Basic Requirement. Within twenty-four (24) hours after the in-patient hospitalization of one or more employees or an employee's amputation or an employee's loss of an eye, as a result of a work-related incident, you must report the in-patient hospitalization, amputation, or loss of an eye to OSHA.  a) The employer did not notify OSHA of an incident that occurred on or about April 14, 2019, which caused the amputation to the left middle finger.
Recent events (2)
  • — I (O) $1474.8
  • — Z (O) $2458

1910.134 E01

Other-than-serious 1 instance 1 exposed
Issued
Feb 25, 2020
Penalty
Initial $0 · Current $0
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace:    (a) Warehouse: On or about 10/31/19, and at times prior, the employer exposed employees to a respiratory hazard, in that medical evaluations were not provided to employees prior to wearing 3M tight fitting half-face respirators.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.134 F01

Other-than-serious 1 instance 1 exposed
Issued
Feb 25, 2020
Penalty
Initial $0 · Current $0
29 CFR 1910.134(f)(1): The employer did not ensure that employee(s) required to use a tight-fitting facepiece respirator passed the appropriate qualitative fit test (QLFT) or quantitative fit test (QNFT):    (a) Paint Area: On or about 10/31/19, and at times prior, the employer exposed employees to a respiratory hazard, in that annual FIT test were not provided to employees prior to wearing 3M tight fitting half-face respirators.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.1200 G08

Other-than-serious 1 instance 1 exposed
Issued
Feb 25, 2020
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(g)(8):   The employer did not maintain in the workplace copies of the required safety data sheets for each hazardous chemical  a) Warehouse: On or about 10/31/19, the employees were exposed to chemical hazards, in that safety data sheets were provided to employees handling hazardous chemicals such as argon.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.1200 H03 IV

Other-than-serious 1 instance 1 exposed
Issued
Feb 25, 2020
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(h)(3)(iv):   The details of the hazard communication program developed by the employer, did not include an explanation of the  safety data sheet, including the order of information and how employee could obtain and use the appropriate hazard information:  a.) Warehouse: On or about 10/31/19, and at times prior, the employer exposed an employee to chemical hazards, in that training to address safety data sheets (SDS) was not provided to an employee who handles hazardous chemicals such as argon while welding products.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Absolute Welding & Consulting, LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344513940.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.