Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: SALUTARE FOODS, LLC

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of SALUTARE FOODS, LLC in 10989 GRAVOIS INDUSTRIAL COURT, SAINT LOUIS, MO 63128 (NAICS 311412). OSHA activity number 344518360.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Salutare Foods, LLC — free Get an email when a new federal OSHA severe-injury report for Salutare Foods, LLC is published. One employer, no account, unsubscribe in one click.
Establishment
SALUTARE FOODS, LLC
Site address
10989 GRAVOIS INDUSTRIAL COURT
City
SAINT LOUIS
State
MO
ZIP
63128
Mailing
10989 GRAVOIS INDUSTRIAL COURT, SAINT LOUIS, MO 63128
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
311412
Employees
35
Ownership type
A

4 citations on file for this inspection.

1910.215 A04

Serious Gravity 5 1 instance 1 exposed
Issued
Jan 24, 2020
Abate by
Feb 20, 2020
Penalty
Initial $6,747 · Current $4,723 Reduced
29 CFR 1910.215(a)(4): On offhand grinding machines, work rests were not used to support the work and/or were not kept adjusted closely to the wheel with a maximum opening of one-eighth inch to prevent the work from being jammed between the wheel and the rest, which may cause wheel breakage:  JOB SITE: 10989 Gravois Industrial Court, Saint Louis, MO  63128, on or about 12/17/2019, workers were permitted to operate a bench grinder (no identifying marking) in the maintenance room was being used without a work rest to support the work.  The workers were exposed to struck-by hazard.
Recent events (2)
  • — I (S) $4722.9
  • — Z (S) $6747

1910.215 B09

Serious Gravity 5 1 instance 1 exposed
Issued
Jan 24, 2020
Abate by
Feb 20, 2020
Penalty
Initial $0 · Current $0
29 CFR 1910.215(b)(9): Guards for abrasive wheel machinery where the operator stands in front of the machine was not constructed so that the peripheral protecting member could be adjusted to the constantly decreasing diameter of the wheel:  JOB SITE: 10989 Gravois Industrial Court, Saint Louis, MO 63128, on or about 12/17/2019, workers were permitted to operate a bench grinder (no identifying marking) in the maintenance room without a peripheral protecting member (adjustable tongue guard).  The workers were exposed to a struck-by hazard.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.305 G02 II

Serious Gravity 5 2 instances 1 exposed
Issued
Jan 24, 2020
Abate by
Feb 20, 2020
Penalty
Initial $6,747 · Current $4,723 Reduced
29 CFR 1910.305(g)(2)(ii): Flexible cords were not used only in continuous lengths without splice or tap:  JOB SITE: 10989 Gravois Industrial Court, Saint Louis, MO 63128, on or about 12/17/2019, workers were permitted to operate the following equipment, where the power flexible cord was not used in continuous lengths.  The flexible cord was temporary repaired with black electrical tape.  The workers were exposed to an electrical hazard.  a. Empire Dough Mixer, Model: 200, S/N: 980126, 240v, 60hz  b. Taper machine-3M-Matic Case Sealing Machine
Recent events (2)
  • — I (S) $4722.9
  • — Z (S) $6747

1910.305 G02 III

Serious Gravity 5 1 instance 1 exposed
Issued
Jan 24, 2020
Abate by
Feb 20, 2020
Penalty
Initial $0 · Current $0
29 CFR 1910.305(g)(2)(iii): Flexible cords and cables were not connected to devices and fittings so that strain relief was provided that would prevent pull from being directly transmitted to the joints or terminal screws:  JOB SITE: 10989 Gravois Industrial Court, Saint Louis, MO 63128, on or about 12/17/2019, Salutare Foods, LLC had not ensured cords had proper strain relief with following equipment:  a.    Domino Control Panel, Model: AGP 220A, S/N: AG9000028416
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

View Salutare Foods, LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344518360.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.