Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: COLORMASTERS, LLC

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of COLORMASTERS, LLC in 632 SMITH ROAD, ALBERTVILLE, AL 35951 (NAICS 326111). OSHA activity number 344535844.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Colormasters, LLC — free Get an email when a new federal OSHA severe-injury report for Colormasters, LLC is published. One employer, no account, unsubscribe in one click.
Establishment
COLORMASTERS, LLC
Site address
632 SMITH ROAD
City
ALBERTVILLE
State
AL
ZIP
35951
Mailing
PO BOX 2289, ALBERTVILLE, AL 35951
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
326111
Employees
550
Ownership type
A

4 citations on file for this inspection.

1910.147 C04 I

Serious Gravity 5 3 instances 4 exposed
Issued
Mar 30, 2020
Abate by
May 14, 2020
Penalty
Initial $10,814 · Current $6,488 Reduced
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:  (a) On or about 01/02/2020 - Lamination department, Machine #3, Model (Pillar Super, SN# C-1436), the employer had not developed a specific procedure for the removal of a bar for cleaning purposes exposing employees to caught-in hazards.  (b) On or about 01/02/2020 - Lamination department, Machine #2, the employer had not developed a specific procedure for the removal of a bar for cleaning purposes exposing employees to caught-in hazards.   (c) On or about 01/02/2020 - Lamination department, Machine #1, the employer had not developed a specific procedure for the removal of a bar for cleaning purposes exposing employees to caught-in hazards.
Recent events (2)
  • — I (S) $6488.4
  • — Z (S) $10814

1910.147 C07 I A

Serious Gravity 5 1 instance 4 exposed
Issued
Mar 30, 2020
Abate by
May 14, 2020
Penalty
Initial $10,814 · Current $6,488 Reduced
29 CFR 1910.147(c)(7)(i)(A): Authorized employee(s) did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation:   (a) On or about 01/02/2020 - Lamination department, employees performing maintenance and servicing oneequipment such as the lamination machine had not received training for the type of work being performed.
Recent events (2)
  • — I (S) $6488.4
  • — Z (S) $10814

1910.212 A01

Serious Gravity 5 1 instance 4 exposed
Issued
Mar 30, 2020
Abate by
Apr 23, 2020
Penalty
Initial $10,814 · Current $6,488 Reduced
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:  (a) On or about 01/02/2020 - Lamination department, Machine #3 (Model-Pillar Super Simplex, SN# C-1436), employees were exposed to a rotating shaft that was not guarded.
Recent events (2)
  • — I (S) $6488.4
  • — Z (S) $10814

1904.29 B01

Other-than-serious 1 instance 550 exposed
Issued
Mar 30, 2020
Abate by
Apr 23, 2020
Penalty
Initial $1,803 · Current $1,082 Reduced
29 CFR 1904.29(b)(1): A Log of all recordable work-related injuries and illnesses (OSHA Form 300 or equivalent), was not completed in the detail as required by the regulation:  (a) On or about 01/02/2020 - Facility, the OSHA 300 form, section "F" was not filled out correctly due to the object directly causing the injury not being specified for entries on the 2019 log.
Recent events (2)
  • — I (O) $1081.8
  • — Z (O) $1803

View Colormasters, LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344535844.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.