SELMA, AL —
OSHA Inspection: MILLER & COMPANY, INC.
Federal Agency inspection · Safety discipline
At a glance
On , OSHA opened a federal Agency safety inspection of MILLER & COMPANY, INC. in 500 HOOPER DRIVE, SELMA, AL 36701 (NAICS 321918). OSHA activity number 344567656.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MILLER & COMPANY, INC.
- Site address
- 500 HOOPER DRIVE
- City
- SELMA
- State
- AL
- ZIP
- 36701
- Mailing
- PO BOX 770, SELMA, AL 36702
What kind of inspection was it?
- Inspection type
- Federal Agency (M)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321918
- Employees
- 41
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.147 C07 I
- Issued
- Jul 7, 2020
- Abate by
- Jul 31, 2020
- Penalty
- Initial $10,390 · Current $7,000 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i): The employer did not provide training to ensure that the purpose and function of the energy control program was understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls were acquired by employees: a) Yates 2 1/4 Side-Matcher; On or about January 14, 2020 and at times prior thereto, the employer exposed employees to caught-in, struck-by, and amputation hazards in that employees were allowed to perform servicing and maintenance on equipment without first being trained to ensure those employees had the knowledge and skills for the safe application, usage, and removal of energy controls. b) Yates 1 1/2 Side-Matcher; On or about January 14, 2020 and at times prior thereto, the employer exposed employees to caught-in, struck-by, and amputation hazards in that employees were allowed to perform servicing and maintenance on equipment without first being trained to ensure those employees had the knowledge and skills for the safe application, usage, and removal of energy controls.
Recent events (2)
- — I (S) $7000
- — Z (S) $10390
1910.147 C04 I
- Issued
- Jul 7, 2020
- Abate by
- Jul 24, 2020
- Penalty
- Initial $103,901 · Current $76,500 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a) Yates 2 1/4 Side-Matcher; On or about January 14, 2020 and at times prior thereto, the employer exposed employees to struck-by, caught-in, and amputation hazards in that the employer failed to ensure energy control procedures were utilized when employees were performing servicing and maintenance activities, such as jam clearing, on the Side Matcher.
Recent events (2)
- — I (W) $76500
- — Z (W) $103901
1910.212 A01
- Issued
- Jul 7, 2020
- Abate by
- Jul 24, 2020
- Penalty
- Initial $103,901 · Current $76,500 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) Yates 2 1/4 Side-Matcher; On or about January 14, 2020 and at times prior thereto, employees were exposed to struck by, caught in, and amputation hazards in that the employer failed to ensure the points of operation were effectively guarded on the 2 1/4 inch Side Matcher.
Recent events (2)
- — I (W) $76500
- — Z (W) $103901
More inspections at Miller & Company, INC.
View Miller & Company, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 321918)
More inspections in AL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344567656.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.