MORRIS RUN, PA —
OSHA Inspection: M&M WOOD PRODUCTS INC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of M&M WOOD PRODUCTS INC in 159 LAKE ST, MORRIS RUN, PA 16939 (NAICS 321920). OSHA activity number 344576939.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- M&M WOOD PRODUCTS INC
- Site address
- 159 LAKE ST
- City
- MORRIS RUN
- State
- PA
- ZIP
- 16939
- Mailing
- PO BOX 207, MORRIS RUN, PA 16939
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321920
- Employees
- 13
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.147 D04 I
- Issued
- Apr 2, 2020
- Abate by
- May 19, 2020
- Penalty
- Initial $2,622 · Current $1,800 Reduced
General-duty citation text
29 CFR 1910.147(d)(4)(i): Lockout or tagout devices were not affixed to each energy isolating device by authorized employees: a) Production area: Employees failed to affix lockout or tagout devices to woodworking equipment (bandsaws & re-saws, cutoff saws, chop saw) during maintenance and servicing (saw blade changes), on or about January 23, 2020. Abatement Certification Required.
Recent events (2)
- — I (S) $1800
- — Z (S) $2622
1910.147 F03 II D
- Issued
- Apr 2, 2020
- Abate by
- May 19, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(f)(3)(ii)(D): Each authorized employee did not affix a personal lockout or tagout device to the group lockout device before working on the machine or equipment: a) Production area: Each authorized employee did not affix a personal lockout or tagout device to the group lockout device before working on equipment including, but not limited to, pallet nailing machine, saws and re-saws, on or about January 23, 2020. Abatement Certification Required.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 C06 II
- Issued
- Apr 2, 2020
- Abate by
- May 19, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(6)(ii): The employer did not certify that periodic inspections of the energy control procedures had been performed: a) Production area: The employer did not certify that periodic inspections of the energy control procedures on equipment including, but not limited to, pallet nailing machine, saws and re-saws had been performed, on or about January 23, 2020. Abatement Certification Required.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.219 C02 I
- Issued
- Apr 2, 2020
- Abate by
- Sep 1, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(c)(2)(i): All exposed part(s) of horizontal shafting seven (7) feet or less from floor or working platform were not protected by stationary casing(s) enclosing shafting completely or by trough(s) enclosing sides and top or sides and bottom of shafting: a) Production area: The horizontal shaft on the dust blower connected to the Baker Products notching machine was not guarded, as observed on or about January 23, 2020. Abatement Certification Required.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.305 B02 I
- Issued
- Apr 2, 2020
- Abate by
- May 19, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(b)(2)(i): Pull boxes, junction boxes, and fittings were not provided with covers approved for the purpose: a) Production area: Electrical boxes (right and left sides) on electric motors to the rear conveyor of the GBN Explorer pallet nailing machine were not covered, as observed on or about January 23, 20020. b) Production area: The electrical control box to the nailing machine was not covered, as observed on or about January 23, 2020. Abatement Certification Required
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at M&M Wood Products INC
View M&M Wood Products INC's full OSHA safety record →
More inspections in this industry (NAICS 321920)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344576939.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.