QUINCY, IL —
OSHA Inspection: AGCO RECYCLING, LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of AGCO RECYCLING, LLC in 4425 GARDNER EXPY, QUINCY, IL 62305 (NAICS 321920). OSHA activity number 344592977.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- AGCO RECYCLING, LLC
- Site address
- 4425 GARDNER EXPY
- City
- QUINCY
- State
- IL
- ZIP
- 62305
- Mailing
- 991 N 453RD LANE, PAYSON, IL 62360
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321920
- Employees
- 14
- Ownership type
- A
Citations
9 citations on file for this inspection.
1910.22 A01
- Issued
- Apr 2, 2020
- Abate by
- Apr 17, 2020
- Penalty
- Initial $3,393 · Current $1,697 Reduced
General-duty citation text
29 CFR 1910.22(a)(1): All places of employment, passageways, storerooms, service rooms, and walking-working surfaces must be kept in a clean, orderly, and sanitary condition: On or about January 29, 2020, employees were exposed to slips and falls while working in the facility because sawdust was allowed to accumulate on the floor.
Recent events (2)
- — I (S) $1696.5
- — Z (S) $3393
1910.213 R04
- Issued
- Apr 2, 2020
- Abate by
- Apr 17, 2020
- Penalty
- Initial $5,938 · Current $2,969 Reduced
General-duty citation text
29 CFR 1910.213(r)(4): The point of operation of machines whose operation exposed employees to injury, was not guarded: On or about January 29, 2020, employees were exposed to laceration and amputation hazards while operating the Baker Band Resaw machine because the blade was not guarded.
Recent events (2)
- — I (S) $2969
- — Z (S) $5938
1910.243 C03
- Issued
- Apr 2, 2020
- Penalty
- Initial $3,393 · Current $1,697 Reduced
General-duty citation text
29 CFR 1910.243(c)(3): Abrasive wheels used on vertical portable grinder right angle head grinders was not provided with a safety guard: On or about January 29, 2020, an employee was exposed to lacerations while operating the RYOBI Angle Grinder because the grinding wheel was not guarded.
Recent events (2)
- — I (S) $1696.5
- — Z (S) $3393
1910.303 B02
- Issued
- Apr 2, 2020
- Abate by
- Apr 17, 2020
- Penalty
- Initial $3,393 · Current $1,697 Reduced
General-duty citation text
29 CFR 1910.303(b)(2): Listed or labeled equipment was not used or installed in accordance with instructions included in the listed and labeling: On or about January 29, 2020, employees were exposed to electrical hazards because the metal quad box was not mounted when used to provide power to portable electrical equipment including a fan and radio.
Recent events (2)
- — I (S) $1696.5
- — Z (S) $3393
1910.305 B01 II
- Issued
- Apr 2, 2020
- Abate by
- Apr 17, 2020
- Penalty
- Initial $3,393 · Current $1,697 Reduced
General-duty citation text
29 CFR 1910.305(b)(1)(ii): Unused openings in cabinets, boxes, and fittings shall be effectively closed: On or about January 29, 2020, employees were exposed to electrical hazards while accessing the electrical panel because there were unused openings in the panel at the following locations: a. Near Bob Hanna Machine, wall with 30 amp service disconnect b. 480 volt panel near baker band resaw machine c. 240 volt panel near baker band resaw machine
Recent events (2)
- — I (S) $1696.5
- — Z (S) $3393
1910.305 C04
- Issued
- Apr 2, 2020
- Abate by
- Apr 17, 2020
- Penalty
- Initial $3,393 · Current $1,697 Reduced
General-duty citation text
29 CFR 1910.305(c)(4): Snap switches mounted in boxes shall have faceplates installed so as to completely cover the opening and seat against the finished surface: On or about January 29, 2019, employees were exposed to electrical hazards while using the switch to control the lights in the facility because there was no faceplate covering the box.
Recent events (2)
- — I (S) $1696.5
- — Z (S) $3393
1910.147 C05 II D
- Issued
- Apr 2, 2020
- Abate by
- Apr 17, 2020
- Penalty
- Initial $2,545 · Current $1,273 Reduced
General-duty citation text
29 CFR 1910.147(c)(5)(ii)(D): Lockout devices and tagout devices shall indicate the identity of the employee applying the device(s): On or about January 29, 2020, the employer did not ensure the lock indicated a current employee applied the lock.
Recent events (2)
- — I (S) $1272.5
- — Z (S) $2545
1910.147 C06 II
- Issued
- Apr 2, 2020
- Abate by
- Apr 17, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(6)(ii): The employer shall certify that the periodic inspections have been performed. The certification shall identify the machine or equipment on which the energy control procedure was being utilized, the date of the inspection, the employees included in the inspection, and the person performing the inspection: On or about January 29, 2020, the employer did not ensure that the machine or equipment on which the energy control procedures were being utilized; contained the date of the inspection, the employees included in the inspection, and the person performing the inspection.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.157 E03
- Issued
- Apr 2, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.157(e)(3): Portable fire extinguishers were not subjected to an annual maintenance check: On or about January 29, 2020, the fire extinguisher located near the maintenance shop had not received an annual maintenance check.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Agco Recycling, LLC
View Agco Recycling, LLC's full OSHA safety record →
More inspections in this industry (NAICS 321920)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344592977.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.