Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: DOMALGO CORPORATION

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of DOMALGO CORPORATION in 1115 MID VALLEY DRIVE, OLYPHANT, PA 18447 (NAICS 562920). OSHA activity number 344605761.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Domalgo Corporation — free Get an email when a new federal OSHA severe-injury report for Domalgo Corporation is published. One employer, no account, unsubscribe in one click.
Establishment
DOMALGO CORPORATION
Site address
1115 MID VALLEY DRIVE
City
OLYPHANT
State
PA
ZIP
18447
Mailing
1115 MID VALLEY DRIVE, OLYPHANT, PA 18447
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
562920
Employees
6
Ownership type
A

4 citations on file for this inspection.

1910.95 B01

Serious Gravity 5 2 instances 6 exposed
Issued
Apr 28, 2020
Abate by
Jul 30, 2020
Penalty
Initial $2,313 · Current $2,313

Hazardous substances 8110

29 CFR 1910.95(b)(1): When employees were subjected to sound exceeding those listed in Table G-16, feasible administrative or engineering controls were not utilized:  a) An employee, large shredder operator, was exposed to continuous noise levels at 325% of the allowable eight (8)-hour time weighted sound level of 90 decibels (dBA).  The equivalent dBA level of 325% is approximately 100.3 dBA.  The sampling was performed for 382 minutes on February 4, 2020. Zero exposure was assumed for the unsampled period of time.  Feasible administrative or engineering controls were not utilized to reduce sound levels.  b) An employee, small shredder operator, was exposed to continuous noise levels at 326% of the allowable eight (8)-hour time weighted sound level of 90 decibels (dBA).  The equivalent dBA level of 32% is approximately 100.4 dBA.  The sampling was performed for 390 minutes on February 4, 2020. Zero exposure was assumed for the unsampled period of time.  Feasible administrative or engineering controls were not utilized to reduce sound levels.    ABATEMENT CERTIFICATION AND DOCUMENTATION REQUIRED
Recent events (1)
  • — Z (S) $2313

1910.95 C01

Serious Gravity 1 2 instances 6 exposed
Issued
Apr 28, 2020
Abate by
Jun 1, 2020
Penalty
Initial $0 · Current $0

Hazardous substances 8110

29 CFR 1910.95(c)(1): The employer did not administer a continuing, effective hearing conservation program as described in 29 CFR 1910.9(c) through (o) whenever employee noise exposures equal or exceed an 8-hour time-weighted average sound level of 85 decibels measured on the A scale, or equivalently a dose of fifty percent:  a) An employee, large shredder operator, was exposed to continuous noise levels at 325% of the allowable eight (8)-hour time weighted sound level of 90 decibels (dBA).  The equivalent dBA level of 325% is approximately 100.3 dBA.  The sampling was performed for 382 minutes on February 4, 2020. Zero exposure was assumed for the unsampled period of time.  A continuing, effective hearing conservation program as described in 29 CFR 1910.95(c) through (n) was not instituted.  b) An employee, small shredder operator, was exposed to continuous noise levels at 326% of the allowable eight (8)-hour time weighted sound level of 90 decibels (dBA).  The equivalent dBA level of 32% is approximately 100.4 dBA.  The sampling was performed for 390 minutes on February 4, 2020. Zero exposure was assumed for the unsampled period of time.  A continuing, effective hearing conservation program as described in 29 CFR 1910.95(c) through (n) was not instituted.    ABATEMENT CERTIFICATION REQUIRED
Recent events (1)
  • — Z (S) $0

1910.212 A01

Serious Gravity 5 2 instances 4 exposed
Issued
Apr 28, 2020
Abate by
Jun 1, 2020
Penalty
Initial $2,892 · Current $2,892
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:  a) The hydraulic dumper located at the feeding table to the large shredder was not equipped with side guarding to protect operators from the pinch points created by the moving dumper bucket and the stationary side beams during operation, on or about, February 4, 2020.  b) The hydraulic dumper located at the feeding table to the small shredder was not equipped with side guarding to protect operators from the pinch points created by the moving dumper bucket and the stationary side beams during operation, on or about, February 4, 2020.  ABATEMENT CERTIFICATION REQUIRED
Recent events (1)
  • — Z (S) $2892

1910.1200 E01

Other-than-serious 1 instance 4 exposed
Issued
Apr 28, 2020
Abate by
Jun 1, 2020
Penalty
Initial $0 · Current $0

Hazardous substances 2260S050S245

29 CFR 1910.1200(e)(1): Employer had not developed or implemented a written hazard communication program including the requirements outlined in 29 CFR 1910.1200(e)(1)(i) and (e)(1)(ii):   a) Sorting and shredding operations, employees were exposed to residual sodium and amine based corrosive liquids, formerly used as food equipment sanitizing agents.  These chemicals remained in small quantities in the crushed containers and employees had occupational exposure to them during sorting and shredding and a written chemical hazard program had not been implemented, on or about February 4, 2020.  ABATEMENT CERTIFICATION REQUIRED
Recent events (1)
  • — Z (O) $0

View Domalgo Corporation's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344605761.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.