JAMESTOWN, PA —
OSHA Inspection: COMBINED SYSTEMS, INC.
Referral inspection · Health discipline
At a glance
On , OSHA opened a referral health inspection of COMBINED SYSTEMS, INC. in 388 KINSMAN ROAD, JAMESTOWN, PA 16134 (NAICS 332993). OSHA activity number 344633623.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- COMBINED SYSTEMS, INC.
- Site address
- 388 KINSMAN ROAD
- City
- JAMESTOWN
- State
- PA
- ZIP
- 16134
- Mailing
- 388 KINSMAN ROAD, JAMESTOWN, PA 16134
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332993
- Employees
- 235
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.119 E06
- Issued
- Aug 12, 2020
- Abate by
- Jul 1, 2022
- Penalty
- Initial $5,899 · Current $3,250 Reduced
General-duty citation text
29 CFR 1910.119(e)(6): 1910.119(e)(6): The employer did not update and revalidate the requirements in paragraph (e)(4) of this section at least every five years, to assure that the process hazard analysis is consistent with the current process. a.) Combined Systems, Inc. - On or about February 14, 2020, and at times prior thereto: employees were potentially exposed to fire and/or explosion hazards in that, the employer had not updated and revalidated the process hazard analysis (hazard evaluation), at least every 5 years, pertaining to the process of manufacturing delay tubes for flash bang grenade devices consisting of Hazard Class/Division 1.1, 1.3, and 1.4 explosive material. The process hazard analysis for manufacturing delay tubes, at the Jamestown, PA facility, was last updated and revalidated on or about August 18, 2014. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states that employees and their representatives were informed of this abatement.
Recent events (3)
- — P (S) $3250
- — I (S) $3250
- — Z (S) $5899
1910.119 O01
- Issued
- Aug 12, 2020
- Abate by
- Jul 1, 2021
- Penalty
- Initial $5,899 · Current $3,250 Reduced
General-duty citation text
29 CFR 1910.119(o)(1): Employer did not certify that they have evaluated compliance with the provisions of this section, at least every three years, to verify that the procedures and practices developed under the standard are adequate and are being followed. a.) Combined Systems, Inc. - On or about February 14, 2020, and at times prior thereto: employees were potentially exposed to fire and/or explosion hazards in that, the employer had not completed compliance audits, pertaining to the process of manufacturing delay tubes for flash bang grenade devices consisting of Hazard Class/Division 1.1, 1.3, and 1.4 explosive material. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states that employees and their representatives were informed of this abatement.
Recent events (3)
- — P (S) $3250
- — I (S) $3250
- — Z (S) $5899
1910.119 J04 IV
- Issued
- Aug 12, 2020
- Abate by
- Sep 29, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.119(j)(4)(iv): The employer did not document each inspection and test that had been performed on process equipment. The documentation did not identify the date of the inspection or test, the name of the person who performed the inspection or test, the serial number or other identifier of the equipment on which the inspection or test was performed, a description of the inspection or test performed, and the results of the inspection or test. a.) Combined Systems, Inc.- On or about February 14, 2020, and at times prior thereto: employees were potentially exposed to fire and/or explosion hazards in that, the employer had not documented results of inspections and tests performed on process equipment including, but not limited to, loaders #1,#2, #3, and fill-pro. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states that employees and their representatives were informed of this abatement.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Combined Systems, INC.
View Combined Systems, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332993)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344633623.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.