Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,191,473Inspections Most recent open 2026-07-28 Last loaded 2026-07-31

OSHA Inspection: TEILHABER MANUFACTURING CORPORATION

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of TEILHABER MANUFACTURING CORPORATION in 2360 INDUSTRIAL LANE, BROOMFIELD, CO 80020 (NAICS 332999). OSHA activity number 344634340.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Teilhaber Manufacturing Corporation — free Get an email when a new federal OSHA severe-injury report for Teilhaber Manufacturing Corporation is published. One employer, no account, unsubscribe in one click.
Site address
2360 INDUSTRIAL LANE
City
BROOMFIELD
State
CO
ZIP
80020
Mailing
PO BOX 366, BROOMFIELD, CO 80038
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332999
Employees
50
Ownership type
A

6 citations on file for this inspection.

1910.1200 E01

Serious Gravity 5 1 instance 4 exposed
Issued
May 12, 2020
Abate by
Jul 1, 2020
Penalty
Initial $5,398 · Current $3,500 Reduced
29 CFR 1910.1200(e)(1):  The employer did not develop, implement, and maintain at each workplace, a written hazard communication program which at least describes how the criteria specified in paragraphs (f), (g), and (h) of this section for labels and other forms of warning, safety data sheets, and employee information and training will be met:      (a) Teilhaber Manufacturing Corporation. 2360 Industrial Lane, Broomfield, CO 80020: The employer did not develop, implement, and maintain at the workplace specific written hazard communication program which describes how the specified in paragraphs (f), (g), and (h) of this section for labels of warning, material safety data sheets, and employee information and training will be met. This condition exposes employees to respiratory hazards associate with xylene, methyl(n-amyl) ketone, and welding fumes.      Abatement Note:  Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
  • — I (S) $3500
  • — Z (S) $5398

1910.1200 H01

Serious Gravity 5 1 instance 4 exposed
Issued
May 12, 2020
Abate by
Jul 1, 2020
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area:      (a) Teilhaber Manufacturing Corporation. 2360 Industrial Lane, Broomfield, CO 80020: The employer did not provide employees with adequate training under this standard. This condition exposes employees to respiratory hazards associate with xylene, methyl(n-amyl) ketone, and welding fumes.      Abatement Note:  Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.1200 G08

Serious Gravity 5 1 instance 4 exposed
Issued
May 12, 2020
Abate by
Jul 1, 2020
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(g)(8):   The employer did not maintain in the workplace copies of the required safety data sheets for each hazardous chemical        (a) Teilhaber Manufacturing Corporation. 2360 Industrial Lane, Broomfield, CO 80020: The employer did not maintain safety data sheets in the workplace. This condition exposes employees to respiratory hazards associate with xylene, methyl(n-amyl) ketone, and welding fumes.      Abatement Note:  Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.134 C01

Other-than-serious 1 instance 4 exposed
Issued
May 12, 2020
Abate by
Jul 1, 2020
Penalty
Initial $0 · Current $0
29 CFR 1910.134(c)(1): A written respiratory protection program that included the provisions in 29 CFR 1910.134(c)(1)(i) - (ix) with worksite specific procedures was not established and implemented for required respirator use:        (a) Teilhaber Manufacturing Corporation. 2360 Industrial Lane, Broomfield, CO 80020: The employer did not maintain a written respiratory protection program when they required employees to use tight fitting half mask respirators. This condition exposes employees to respiratory hazards associate with xylene, methyl(n-amyl) ketone, and welding fumes.      Abatement Note:  Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.134 E01

Other-than-serious 1 instance 4 exposed
Issued
May 12, 2020
Abate by
Jul 1, 2020
Penalty
Initial $0 · Current $0
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace:      (a) Teilhaber Manufacturing Corporation. 2360 Industrial Lane, Broomfield, CO 80020: The employer did not provide employees with a medical evaluation prior to requiring employees to use tight fitting half mask respirators. This condition exposes employees to respiratory hazards associate with xylene, and methyl(n-amyl) ketone.      Abatement Note:  Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.134 F01

Other-than-serious 1 instance 4 exposed
Issued
May 12, 2020
Abate by
Jul 1, 2020
Penalty
Initial $0 · Current $0
29 CFR 1910.134(f)(1): The employer did not ensure that employee(s) required to use a tight-fitting facepiece respirator passed the appropriate qualitative fit test (QLFT) or quantitative fit test (QNFT):      (a) Teilhaber Manufacturing Corporation. 2360 Industrial Lane, Broomfield, CO 80020: The employer did not provide employees with a fit tests prior to requiring employees to use tight fitting half mask respirators. This condition exposes employees to respiratory hazards associate with xylene, and methyl(n-amyl) ketone.      Abatement Note:  Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Teilhaber Manufacturing Corporation's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344634340.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.