Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: PASCO

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of PASCO in 7250 PASCHALL AVENUE, PHILADELPHIA, PA 19142 (NAICS 423930). OSHA activity number 344667084.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Pasco — free Get an email when a new federal OSHA severe-injury report for Pasco is published. One employer, no account, unsubscribe in one click.
Establishment
PASCO
Site address
7250 PASCHALL AVENUE
City
PHILADELPHIA
State
PA
ZIP
19142
Mailing
7250 PASCHALL AVENUE, PHILADELPHIA, PA 19142
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
423930
Employees
21
Ownership type
A

5 citations on file for this inspection.

1910.303 B07 I

Other-than-serious Gravity 5 1 instance 1 exposed
Issued
Sep 2, 2020
Penalty
Initial $3,856 · Current $1,000 Reduced
29 CFR 1910.303(b)(7)(i): Unused openings in circuit breaker housing was not effectively closed to afford protection substantially equivalent to the wall of the equipment.  a) 7250 Paschall Avenue Philadelphia, PA 19142, workbench behind bailer operator platform: The employer did not ensure that unused openings in an energized (240 volt) circuit breaker panel were effectively closed thus exposing employee to electrocution hazards.  Condition was observed on or about 02MAR2020.
Recent events (3)
  • — F (O) $1000
  • — C (S) $3856
  • — Z (S) $3856

1910.305 G01 IV A

Deleted Serious Gravity 5 1 instance 1 exposed
Issued
Sep 2, 2020
Abate by
Sep 22, 2020
Penalty
Initial $0 · Current $0
29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and cables were used as a substitute for fixed wiring of a structure:  a) 7250 Paschall Avenue Philadelphia, PA 19142, Diesel Fueling Area. The employer allowed the use of a temporary flexible extension cord as permanent wiring to energize (115 volt) the pump on a diesel fuel storage tank thus exposing the employees to fire and explosion hazards.  Condition was observed on or about 02 MAR 2020.
Recent events (3)
  • — F (S) $0
  • — C (S) $0
  • — Z (S) $0

1910.138 A

Other-than-serious Gravity 5 1 instance 4 exposed
Issued
Sep 2, 2020
Abate by
Sep 22, 2020
Penalty
Initial $4,626 · Current $1,000 Reduced
29 CFR 1910.138(a): The employer did not select and require employees to use appropriate hand protection when employees' hands are exposed to hazards such as those from severe cuts or lacerations.  a) 7250 Paschall Avenue Philadelphia, PA 19142: The employer did not select, require, and provide appropriate hand protection, gloves, thus exposing employees to cuts or lacerations of the hands while handling metal scraps.  Condition was observed on or about 02 MAR 2020.
Recent events (3)
  • — F (O) $1000
  • — C (S) $4626
  • — Z (S) $4626

1910.212 A01

Serious Gravity 5 1 instance 3 exposed
Issued
Sep 2, 2020
Penalty
Initial $3,856 · Current $2,000 Reduced
29 CFR 1910.212(a)(1): Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:  a) 7250 Paschall Avenue Philadelphia, PA 19142, Bailing Machine Area: The employer did not ensure that the bailer machine was provided/equipped with one or more machine guarding methods, exposing employees to amputation and caught-between hazards.  Condition was observed on or about 02MAR2020.
Recent events (3)
  • — F (S) $2000
  • — C (S) $3856
  • — Z (S) $3856

1910.219 C02 I

Deleted Serious Gravity 5 1 instance 3 exposed
Issued
Sep 2, 2020
Penalty
Initial $0 · Current $0
29 CFR 1910.219(c)(2)(i): All exposed part(s) of horizontal shafting seven (7) feet or less from floor or working platform were not protected by stationary casing(s) enclosing shafting completely or by trough(s) enclosing sides and top or sides and bottom of shafting:  7250 Paschall Avenue Philadelphia, PA 19142, Bailing Machine Area: The employer did not ensure that the bailer machine rotating shafts were provided/equipped with one or more machine guarding methods, exposing employees to amputation and entanglement hazards.  Condition was observed on or about 02 MAR 2020.
Recent events (3)
  • — F (S) $0
  • — C (S) $0
  • — Z (S) $0

View Pasco's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344667084.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.