BOISE, ID —
OSHA Inspection: FRANKLIN BUILDING SUPPLY
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of FRANKLIN BUILDING SUPPLY in 11700 W FRANKLIN RD, BOISE, ID 83709 (NAICS 423310). OSHA activity number 344677851.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- FRANKLIN BUILDING SUPPLY
- Site address
- 11700 W FRANKLIN RD
- City
- BOISE
- State
- ID
- ZIP
- 83709
- Mailing
- 11700 W FRANKLIN RD, BOISE, ID 83709
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 423310
- Employees
- 650
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.213 P04
- Issued
- Jun 9, 2020
- Abate by
- Jul 6, 2020
- Penalty
- Initial $3,904 · Current $0 Reduced
General-duty citation text
29 CFR 1910.213(p)(4): Belt sanding machinery was not provided with a guard at each nip point where the sanding belt ran onto a pulley, to prevent the operator's hands or fingers from coming into contact with nip points: (a) Custom Section of the Door Shop: On or about March 4, 2020 and at times prior to a belt sanding machine was unguarded for custom sanding operations. Note: Abatement certification is required for this item.
Recent events (2)
- — I (S) $0
- — Z (S) $3904
1910.215 B09
- Issued
- Jun 9, 2020
- Abate by
- Jul 6, 2020
- Penalty
- Initial $3,904 · Current $1,952 Reduced
General-duty citation text
29 CFR 1910.215(b)(9): Guard for abrasive wheel machine where the operator stands in front of the machine was not constructed so that the peripheral protecting member could be adjusted to the constantly decreasing diameter of the wheel: (a) Door Shop: On or about March 4, 2020 and at times prior to, a Central Machinery 6" bench grinder was used without a guard. Note: Abatement certification is required for this item.
Recent events (2)
- — I (S) $1952
- — Z (S) $3904
1910.242 B
- Issued
- Jun 9, 2020
- Abate by
- Jul 6, 2020
- Penalty
- Initial $3,904 · Current $1,952 Reduced
General-duty citation text
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.: (a) Door Shop: On or about March 4, 2020 and at times prior to, compressed air set to approximately 100 psi was used to blow saw dust and wood chips off work stations and other areas. Note: Abatement certification is required for this item.
Recent events (2)
- — I (S) $1952
- — Z (S) $3904
1910.303 B02
- Issued
- Jun 9, 2020
- Abate by
- Jul 6, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling: (a) Door Shop: On or about March 4, 2020 and at times prior to, 4"x4" electrical boxes location through the shop were not surface mounted in accordance to listing and labeling of such items. Note: Abatement certification is required for this item.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.303 G01
- Issued
- Jun 9, 2020
- Abate by
- Jul 6, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(g)(1): Sufficient access and working space was not provided and maintained about all electric equipment (operating at 600 volts, nominal, or less to ground) to permit ready and safe operation and maintenance of such equipment: (a) Door Shop: On or about March 4, 2020 and at times prior to, the path to the electrical boxes in the back of the shop was approximately 15 inches wide and the area around the boxes was not clear. Note: Abatement certification is required for this item.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Franklin Building Supply
View Franklin Building Supply's full OSHA safety record →
More inspections in this industry (NAICS 423310)
More inspections in ID
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344677851.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.