Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: GEORGE WEIS COMPANY

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of GEORGE WEIS COMPANY in 1077 HARTMAN LANE, O FALLON, IL 62269 (NAICS 238310). OSHA activity number 344682216.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch George Weis Company — free Get an email when a new federal OSHA severe-injury report for George Weis Company is published. One employer, no account, unsubscribe in one click.
Establishment
GEORGE WEIS COMPANY
Site address
1077 HARTMAN LANE
City
O FALLON
State
IL
ZIP
62269
Mailing
101 EAST WHITE ST., MILLSTADT, IL 62260
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
A
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238310
Employees
2
Ownership type
A

6 citations on file for this inspection.

1926.20 B02

Deleted Serious Gravity 5 1 instance 2 exposed
Issued
Apr 3, 2020
Abate by
Apr 30, 2020
Penalty
Initial $6,747 · Current $0 Reduced
29 CFR 1926.20(b)(2):  The employer did not initiate and maintain programs which provided for frequent and regular inspections of the job site, materials and equipment to be made by a competent person(s):    On or about 3/6/2020, the employer did not maintain jobsite inspections that were performed by a person competent to ensure employees were not exposed to the hazard of falling during construction operations.
Recent events (3)
  • — F (S) $0
  • — C (S) $6747
  • — Z (S) $6747

1926.454 A

Deleted Serious Gravity 5 1 instance 1 exposed
Issued
Apr 3, 2020
Abate by
Apr 30, 2020
Penalty
Initial $6,747 · Current $0 Reduced
29 CFR 1926.454(a): The employer did not have each employee who performed work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of aerial lift being used and to understand the procedures to control or minimize those hazards:  On or about 3/6/2020, the employer did not provide scaffold training to enable employees to recognize and control the hazards at their worksite while performing commercial construction.  The employees were working in the basket of a JLG 460SJ aerial lift and were exposed to the hazard of falling approximately fourteen (14) feet.
Recent events (3)
  • — F (S) $0
  • — C (S) $6747
  • — Z (S) $6747

1926.503 A01

Deleted Serious Gravity 5 1 instance 1 exposed
Issued
Apr 3, 2020
Abate by
Apr 30, 2020
Penalty
Initial $0 · Current $0
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee who might be exposed to fall hazards:  On or about 3/6/2020, the employer did not provide fall protection training to enable employees to recognize and control the fall hazards at their worksite while performing commercial construction.  Employees were exposed to the hazard of falling approximately fourteen (14) feet.
Recent events (3)
  • — F (S) $0
  • — C (S) $0
  • — Z (S) $0

1926.501 B01

Serious Gravity 10 1 instance 2 exposed
Issued
Apr 3, 2020
Abate by
Aug 24, 2020
Penalty
Initial $9,446 · Current $6,140 Reduced
29 CFR 1926.501(b)(1): Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems.  On or about 3/6/2020, the employer did not ensure fall protection was implemented for employees performing construction work on a roof.  Employees were exposed to falling off the side of the building roof and had fall hazards associated with an approximately fourteen (14) foot fall.
Recent events (3)
  • — F (S) $6140
  • — C (S) $9446
  • — Z (S) $9446

1926.453 B02 V

Repeat Gravity 10 1 instance 1 exposed
Issued
Apr 3, 2020
Abate by
Aug 24, 2020
Penalty
Initial $18,892 · Current $12,280 Reduced
29 CFR 1926.453(b)(2)(v): A body belt was not worn and/or a lanyard was not attached to the boom or basket when working from an aerial lift:    On or about 3/6/2020, the employer did not ensure that employees working in the basket of a JLG 460SJ aerial lift had their lanyards connected to an anchor point on the basket or boom.  The employees were working in the basket at a height of approximately fourteen (14) feet.    Note:  As of January 1, 1998, subpart M of this part (1926.502(d)) provides that body belts are not acceptable as part of a personal fall arrest system.  The use of a body belt in a tethering system or in a restraint system is acceptable and is regulated  George Weis Company was previously cited for a violation of this occupational safety and health standard, 29 CFR 1926.453(b)(2)(v), which was contained in OSHA inspection number 1331325, citation number 1, item number 1 and was affirmed as a final order on 6/6/2019, with respect to a workplace located at 7 Commerce Drive, Hampton Inn, Collinsville, IL 62234.
Recent events (3)
  • — F (R) $12280
  • — C (R) $18892
  • — Z (R) $18892

1926.503 B01

Other-than-serious 1 instance 2 exposed
Issued
Apr 3, 2020
Abate by
Aug 24, 2020
Penalty
Initial $0 · Current $0
29 CFR 1926.503(b)(1): The employer shall verify compliance with paragraph (a) of this section by preparing a written (training) certification record including the name or other identity of the employee trained, the date(s) of the training, and the signature of the person who conducted the training or the signature of the employer:  On or about 3/6/2020, the employer did not verify that employees had received fall protection training and completed a written certification record in accordance with the standard.
Recent events (3)
  • — F (O) $0
  • — C (O) $0
  • — Z (O) $0

View George Weis Company's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344682216.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.