Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: AUTOMATED FRAMING LLC

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of AUTOMATED FRAMING LLC in 10609 SHOREVIEW PLACE, SISTER BAY, WI 54234 (NAICS 238130). OSHA activity number 344794581.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Automated Framing LLC — free Get an email when a new federal OSHA severe-injury report for Automated Framing LLC is published. One employer, no account, unsubscribe in one click.
Site address
10609 SHOREVIEW PLACE
City
SISTER BAY
State
WI
ZIP
54234
Mailing
1812 KARAU DR, MARSHFIELD, WI 54449
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
15
Ownership type
A

4 citations on file for this inspection.

1926.102 A01

Serious Gravity 5 1 instance 1 exposed
Issued
Aug 11, 2020
Penalty
Initial $3,084 · Current $1,542 Reduced
29 CFR 1926.102(a)(1): The employer shall ensure that each affected employee uses appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation.    On June 17, 2020 at 10609 Shoreview Place in Sister Bay, WI, an employee was utilizing powered hand tools without wearing eye or face protection; pneumatic nail gun and battery circular saw used to install roof sheathing.
Recent events (2)
  • — I (S) $1542
  • — Z (S) $3084

1926.451 G04 II

Serious Gravity 5 1 instance 1 exposed
Issued
Aug 11, 2020
Penalty
Initial $3,856 · Current $1,928 Reduced
29 CFR 1926.451(g)(4)(ii): The top edge height of top-rails or equivalent member on supported scaffolds manufactured or placed in service after January 1, 2000 shall be installed between 38 inches (0.97 m) and 45 inches (1.2 m) above the platform surface.    On June 17, 2020 at 10609 Shoreview Place in Sister Bay, WI, an employee was exposed to a fall hazard thirty-one feet above surface level while standing on the mid-rail of a personnel platform elevated by a Genie GTH 844 Telehandler; climbing on the mid-rail eliminated a top guardrail for a guardrail system.
Recent events (2)
  • — I (S) $1928
  • — Z (S) $3856

1926.501 B13

Serious Gravity 10 1 instance 1 exposed
Issued
Aug 11, 2020
Penalty
Initial $5,398 · Current $2,699 Reduced
29 CFR 1926.501(b)(13): "Residential construction." Each employee engaged in residential construction activities 6 feet (1.8 m) or more above lower levels shall be protected by guardrail systems, safety net system, or personal fall arrest system unless another provision in paragraph (b) of this section provides for an alternative fall protection measure.    On June 17, 2020 at 10609 Shoreview Place in Sister Bay, WI, an employee was working on a roof surface thirty-five feet above surface level without utilizing required fall protection equipment.
Recent events (2)
  • — I (S) $2699
  • — Z (S) $5398

1926.503 A02 III

Serious Gravity 5 1 instance 2 exposed
Issued
Aug 11, 2020
Penalty
Initial $0 · Current $0
29 CFR 1926.503(a)(2)(iii):  The employer shall assure that each employee has been trained, as necessary, by a competent person qualified in the use and operation of guardrail systems, personal fall arrest systems, safety net systems, warning line systems, safety monitoring systems, controlled access zones, and other protection to be used.  On June 17, 2020 at 10609 Shoreview Place in Sister Bay, WI, the employer had not provided required fall protection safety training for employees working at heights greater than six feet.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

View Automated Framing LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344794581.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.