OSHA Inspection: IMAGE TIME INC.

Issued

2020-09-30 00:00:00

Abate by

2020-10-06 00:00:00

Penalty

Initial $1966.00 · Current $500.00 Reduced

General-duty citation text

29 CFR 1910.23(b)(10): (10) Any ladder with structural or other defects is immediately tagged "Dangerous: Do Not Use" or with similar language in accordance with �1910.145 and removed from service until repaired in accordance with �1910.22(d), or replaced;  (a) Facility, 2965 Pittsburgh Road, Perryopolis, PA:  On or about July 22, 2020 a mobile ladder stand had a bend frame section and was not immediately taken out service.  The mobile ladder was used by employees to obtain items from the shelving units and was not stable nor did the braking mechanism work exposing employees to potential injury from tip over hazards.

Issued

2020-09-30 00:00:00

Abate by

2020-10-06 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.23(e)(1)(vii): (vii) Mobile ladder stands and platforms that have wheels or casters are equipped with a system to impede horizontal movement when an employee is on the stand or platform:  (a) Facility, 2965 Pittsburgh Road, Perryopolis, PA:  On or about July 22, 2020 a mobile ladder stand did not impede horizontal movement when employees were on the platform.  The braking system was not operable and the ladder would move and not stay in place when used by employees to obtain stock from shelving units.

Issued

2020-09-30 00:00:00

Abate by

2020-10-06 00:00:00

Penalty

Initial $1966.00 · Current $500.00 Reduced

General-duty citation text

29 CFR 1910.133(a)(3): The employer did not ensure that each affected employees who wear prescription lenses while engaged in operations that involve eye hazards wears eye protection that incorporates the prescription in its design, or wears eye protection that can be worn over the prescription lenses without disturbing the proper position of the prescription lenses or the protective lenses:  (a) Facility, Ball Transfer Area, 2965 Pittsburgh Road, Perryopolis, PA:  On or about July 22, 2020 an employee operating an Aida power stamping machine wore prescription lenses and the lens was not made of safety material nor was the employee wearing eye protection of their prescription lenses.

Issued

2020-09-30 00:00:00

Abate by

2020-11-18 00:00:00

Penalty

Initial $2622.00 · Current $600.00 Reduced

General-duty citation text

29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:  (a) Facility(s), 2965 Pittsburgh Road, Perryopolis, PA:  On or about July 22, 2020 the employer had not developed procedures to control potentially hazardous energy for employees who perform servicing and maintenance of equipment in the various companies on the site.  Equipment serviced and maintained, include, but are not limited to: power presses, lathes, multi-press forming machines, CNC equipment, band saws, and panel saws.

Issued

2020-09-30 00:00:00

Abate by

2020-10-13 00:00:00

Penalty

Initial $3277.00 · Current $800.00 Reduced

General-duty citation text

29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:  (a) Facility, Advance Material Science, 2965 Pittsburgh Road, Perryopolis, PA:  On or about July 22, 2020 no guard was in place on the DoAll band saw used by employees to cut "fish" paper, transite, marinite, CS85, NAD 11 or Nema.  Employees cut various sizes of materials as small as 2" x 2" and are exposed to the rotating blade.  (b) Facility, Ball Transfer, 2965 Pittsburgh Road, Perryopolis, PA:  On or about July 22, 2020 no guard was in place on the lathe used in the tool & die department.  An employee uses the lathe to polish tooling and is exposed to the rotating chuck and flying debris.

Issued

2020-09-30 00:00:00

Abate by

2020-10-20 00:00:00

Penalty

Initial $2622.00 · Current $600.00 Reduced

General-duty citation text

29 CFR 1910.303(g)(2)(i): Except as elsewhere required or permitted by Subpart S of Part 1910, live parts of electric equipment operating  at 50 volts or more were not guarded against accidental contact by use of approved cabinets or other forms of approved enclosures or by any of the means identified in paragraphs (A), (B), (C), and (D) of 29 CFR 1910.303(g)(2)(i):  (a) Facility, 2965 Pittsburgh Road, Perryopolis, PA:  On or about July 22, 2020 an electrical transformer was installed approximately 53 inches above the work table and not protected against accidental contact by an approved cabinet or other form of approved enclosure.  An employee works at the table processing tubes to make neon lights and is exposed to potential electrical hazards.

Issued

2020-09-30 00:00:00

Abate by

2020-11-18 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.178(l)(2)(ii): The employer did not ensure that each operator had successfully completed the training consisting of a combination of formal instruction (e.g., lecture, discussion, interactive computer learning, video tape, written material), practical training (demonstrations performed by the trainer and practical exercises performed by the trainee), and evaluation of the operator's performance in the workplace:  (a) Facility, 2965 Pittsburgh Road, Perryopolis, PA:  On or about July 22, 2020 employees who operate the powered industrial trucks did not receive training that included practical exercises performed by the trainee and evaluation of their performance in the workplace.  Employees only received classroom training that included watching a video and taking a written test.