Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: FIDEL ANTONIO RIVERA

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of FIDEL ANTONIO RIVERA in 76 TIMBERVIEW CIRCLE LOT 76, NEWNAN, GA 30265 (NAICS 238130). OSHA activity number 344917992.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Fidel Antonio Rivera — free Get an email when a new federal OSHA severe-injury report for Fidel Antonio Rivera is published. One employer, no account, unsubscribe in one click.
Site address
76 TIMBERVIEW CIRCLE LOT 76
City
NEWNAN
State
GA
ZIP
30265
Mailing
2988 WILDFLOWER LN, SNELLVILLE, GA 30039
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
4
Ownership type
A

6 citations on file for this inspection.

1926.20 B02

Serious Gravity 5 1 instance 4 exposed
Issued
Feb 12, 2021
Abate by
Mar 11, 2021
Penalty
Initial $3,862 · Current $3,862
29 CFR 1926.20(b)(2): The employer did not initiate and maintain programs which provided for frequent and regular inspections of the job site, materials and equipment to be made by a competent person(s)  a)	New residential construction Lot 76:  On or about 9/9/2020, and at times prior, employees were exposed to fall and struck-by hazards, in that the employer failed to initiate programs that required frequent and regular inspections of the worksite to ensure framing employees were provided and wore personal protective required to do their tasks safely.
Recent events (1)
  • — Z (S) $3862

1926.302 B05

Serious Gravity 5 1 instance 2 exposed
Issued
Feb 12, 2021
Abate by
Mar 11, 2021
Penalty
Initial $2,575 · Current $2,575
29 CFR 1926.302(b)(5): The manufacturer's safe operating pressure for hoses, pipes, valves, filters, and other fittings shall not be exceeded,  a)	New residential construction Lot 76, roof and lower level:  On or about 9/9/2020, and at times prior, the employer exposed employees to struck-by hazards, in that the employees were allowed to operate a Pneutools Model SN22/83H framing nail gun at 135 PSI while conducting framing activities which is above the required operating pressure of 70-120 PSI.
Recent events (1)
  • — Z (S) $2575

1926.503 A01

Serious Gravity 5 1 instance 2 exposed
Issued
Feb 12, 2021
Abate by
Mar 11, 2021
Penalty
Initial $3,218 · Current $3,218
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:  a)	New residential construction, lot 76, roof:  On or about 9/9/2020, and at times prior, the employer exposed employees to fall hazards of 20 feet 3-1/2 inches to the lower level, in that the employer did not provide fall protection training to employees working on the roof conducting framing activities so that they are able to recognize fall hazards and how to prevent them.
Recent events (1)
  • — Z (S) $3218

1926.1053 B13

Serious Gravity 5 1 instance 1 exposed
Issued
Feb 12, 2021
Abate by
Mar 11, 2021
Penalty
Initial $3,218 · Current $3,218
29 CFR 1926.1053(b)(13): The top or top step of a stepladder was used as a step.  a) New residential construction, Lot 76, Lower level:  On or about 9/9/2020, and at times prior, the employer exposed employees to fall hazards of more than 4 feet to the concrete slab below, in that the employees were utilizing the top step of a Louisville Model FS1504, 4-foot portable step ladder to gain access to work on the outside frame of a residential construction building on the second floor. The second floor was approximately 4 1/2 feet above the top of the ladder.
Recent events (1)
  • — Z (S) $3218

1926.102 A01

Repeat Gravity 5 1 instance 2 exposed
Issued
Feb 12, 2021
Abate by
Mar 11, 2021
Penalty
Initial $12,873 · Current $12,873
29 CFR 1926.102(a)(1): The employer did not ensure that each affected employee used appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation.  a)	New residential construction, lot 76, roof and lower levels:  On or about 9/9/2020, and at times prior, the employer exposed employees to struck-by hazards, in that employees working with a pneumatic Pneutools Model SN22/83H framing nail gun @ 135 PSI were not provided with eye protection while operating the nail gun conducting framing activities.     Fidel Antonio Rivera was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1926.102(a)(1), which was contained in OSHA inspection number 1288480, citation number 1, item number 1 and was affirmed as a final order on 3/29/2018 , with respect to a workplace located at 5716 Taylor Way, Sandy Springs, GA.30328.
Recent events (1)
  • — Z (R) $12873

1926.501 B13

Repeat Gravity 5 1 instance 1 exposed
Issued
Feb 12, 2021
Abate by
Mar 11, 2021
Penalty
Initial $16,092 · Current $16,092
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b):   a)	New residential construction, lot 76, roof:  On or about 9/9/2020, and at times prior, the employer exposed employees to fall hazards of 20 feet 3-1/2 inches to the lower level, in that a fall protection system was not provided by the employer while employees were engaged in framing activities on a 6:12 pitched roof.   Fidel Antonio Rivera was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1926.501(b)(13), which was contained in OSHA inspection number1288480, citation number 1, Item number 2 and was affirmed as a final order on 3/29/2018, with respect to a workplace located at 5716 Taylor Way, Sandy Springs, GA. 30328.
Recent events (1)
  • — Z (R) $16092

View Fidel Antonio Rivera's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344917992.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.