CHIPPEWA FALLS, WI —
OSHA Inspection: BERRY GLOBAL, INC.
Federal Agency inspection · Safety discipline
At a glance
On , OSHA opened a federal Agency safety inspection of BERRY GLOBAL, INC. in 1701 FIRST AVENUE, CHIPPEWA FALLS, WI 54729 (NAICS 326112). OSHA activity number 344959606.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- BERRY GLOBAL, INC.
- Site address
- 1701 FIRST AVENUE
- City
- CHIPPEWA FALLS
- State
- WI
- ZIP
- 54729
- Mailing
- 1701 FIRST AVENUE, CHIPPEWA FALLS, WI 54729
What kind of inspection was it?
- Inspection type
- Federal Agency (M)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 326112
- Employees
- 166
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.147 C06 II
- Issued
- Apr 2, 2021
- Abate by
- Apr 30, 2021
- Penalty
- Initial $13,653 · Current $13,653
General-duty citation text
1910.147(c)(6)(ii) The employer shall certify that the periodic inspections have been performed. The certification shall identify the machine or equipment on which the energy control procedure was being utilized, the date of the inspection, the employees included in the inspection, and the person performing the inspection. (a) Cast Extrusion line 25; The lockout procedure ID # LP1052 - Winders Complete Line 25 Cast Area was updated last on November 14, 2018 and had not been reviewed since. (b) Cast Extrusion line 25; The lockout procedure ID# LP1058 - Overhead Crane Line 25 Cast Area was updated last on July 27, 2018 and had not been reviewed since.
Recent events (3)
- — F (O) $13653
- — C (S) $13653
- — Z (S) $13653
1910.147 C07 I
- Issued
- Apr 2, 2021
- Abate by
- Apr 30, 2021
- Penalty
- Initial $13,653 · Current $13,653
General-duty citation text
29 CFR 1910.147(c)(7)(i): The employer did not provide training to ensure that the purpose and function of the energy control program is understood by employees and that employees acquired the knowledge and skills required for the safe application, usage and removal of energy control devices: (a) Cast Extrusion line 25; On or about October 5, 2020, the employer did not provide affected employees with authorized employee training when employee's duties included performing servicing and/or maintenance tasks such as, but not limited to, threading/stringing the line.
Recent events (3)
- — F (S) $13653
- — C (S) $13653
- — Z (S) $13653
1910.147 D04 I
- Issued
- Apr 2, 2021
- Abate by
- Apr 30, 2021
- Penalty
- Initial $13,653 · Current $13,653
General-duty citation text
29 CFR 1910.147(d)(2): An orderly shutdown of machine or equipment was not utilized to avoid any additional or increased hazards to employees as a result of equipment stoppage: Machine or equipment isolation. All energy isolating devices that are needed to control the energy to the machine or equipment shall be physically located and operated in such a manner as to isolate the machine or equipment from the energy source(s). Lockout or tagout devices shall be affixed to each energy isolating device by authorized employees. (a) Cast Extrusion line 25; On or about October 5, 2020, the Davis-Standard Converting Systems model U-2164-12 was not shutdown or turned off prior to performing set up tasks including threading/stringing the line.
Recent events (3)
- — F (S) $13653
- — C (S) $13653
- — Z (S) $13653
1910.147 D03
- Issued
- Apr 2, 2021
- Abate by
- Apr 30, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(d)(3): All energy isolating devices that were needed to control the energy to the machine or equipment were not physically located and operated in such a manner as to isolate the machine or equipment from the energy source(s): (a) Cast Extrusion line 25; On or about October 5, 2020, energy isolating devices were not utilized to isolate the carriage, roller(s), and other potential energy sources while employees performed set up tasks to include threading/stringing line.
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
1910.147 D04 I
- Issued
- Apr 2, 2021
- Abate by
- Apr 30, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(d)(4)(i): Lockout or tagout devices were not affixed to each energy isolating device by authorized employees: (a) Cast Extrusion line 25; On or about October 5, 2020, lockout or tagout devices were not affixed to each energy isolating device by authorized employees when employees performed set up tasks to include threading/stringing line.
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
More inspections at Berry Global, INC.
View Berry Global, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 326112)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344959606.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.