Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: WOODCRAFT FRAMING LLC.

Unprogrammed Other inspection · Safety discipline

On , OSHA opened an unprogrammed Other safety inspection of WOODCRAFT FRAMING LLC. in 19 CHIANTI DRIVE, SALEM, NH 03079 (NAICS 238130). OSHA activity number 344969662.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Woodcraft Framing LLC. — free Get an email when a new federal OSHA severe-injury report for Woodcraft Framing LLC. is published. One employer, no account, unsubscribe in one click.
Site address
19 CHIANTI DRIVE
City
SALEM
State
NH
ZIP
03079
Mailing
9 WILLOW STREET, MILFORD, NH 03055
Inspection type
Unprogrammed Other (I)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
5
Ownership type
A

5 citations on file for this inspection.

1926.20 B01

Serious Gravity 10 1 instance 4 exposed
Issued
Feb 16, 2021
Abate by
Feb 22, 2021
Penalty
Initial $4,096 · Current $1,500 Reduced
29 CFR  1926.20(b)(1):The employer did not initiate and maintain accident prevention programs as necessary to comply with this part:  a. Site - On or about October 1, 2020, the employer did not establish a safety and health program for the company's employees.
Recent events (2)
  • — I (S) $1500
  • — Z (S) $4096

1926.20 B02

Serious Gravity 5 1 instance 4 exposed
Issued
Feb 16, 2021
Abate by
Feb 22, 2021
Penalty
Initial $0 · Current $0
29 CFR  1926.20(b)(2):The employer did not initiate and maintain programs which provided for frequent and regular inspections of the job site, materials and equipment to be made by a competent person(s):  a. Site - On or about October 1, 2020, the employer did not perform frequent and regular inspections by a competent person to identify hazards such as falls.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.503 A01

Serious Gravity 5 1 instance 4 exposed
Issued
Feb 16, 2021
Abate by
Feb 22, 2021
Penalty
Initial $2,926 · Current $0 Reduced
29 CFR  1926.503(a)(1):The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:  a. Site - On or about October 1, 2020, the employer did not provide fall protection training to employees to ensure that the employees understood the hazards of falling and means necessary to minimize or eliminate these hazards.
Recent events (2)
  • — I (S) $0
  • — Z (S) $2926

1926.501 B13

Serious Gravity 10 1 instance 4 exposed
Issued
Feb 16, 2021
Abate by
Feb 22, 2021
Penalty
Initial $4,096 · Current $1,500 Reduced
29 CFR 1926.501(b)(13): Employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system or personal fall arrest systems:  a. Site - On or about October 1, 2020, employees engaged in framing activities were exposed to falls of over 9 feet, where fall protection was not provided or utilized to prevent the hazard.
Recent events (2)
  • — I (S) $1500
  • — Z (S) $4096

1926.1053 B01

Serious Gravity 10 1 instance 4 exposed
Issued
Feb 16, 2021
Penalty
Initial $4,096 · Current $0 Reduced
29 CFR 1926.1053(b)(1): Where portable ladders were used for access to an upper landing surface and the ladder's length allows, the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface being accessed:  a. Site - On or about October 1, 2020, the eight-foot stepladder utilized by employees for accessing the upper level work area was not adequate, in that the ladder did not extend 3 feet above the upper landing working surface.
Recent events (2)
  • — I (S) $0
  • — Z (S) $4096

View Woodcraft Framing LLC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344969662.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.