Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: CASILLAS ENTERPRISES

Unprogrammed Other inspection · Safety discipline

On , OSHA opened an unprogrammed Other safety inspection of CASILLAS ENTERPRISES in 6027 STEWART RD., GALVESTON, TX 77550 (NAICS 238130). OSHA activity number 344971346.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Casillas Enterprises — free Get an email when a new federal OSHA severe-injury report for Casillas Enterprises is published. One employer, no account, unsubscribe in one click.
Site address
6027 STEWART RD.
City
GALVESTON
State
TX
ZIP
77550
Mailing
26119 I 45 N STE: 208 B, THE WOODLANDS, TX 77380
Inspection type
Unprogrammed Other (I)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
6
Ownership type
A

6 citations on file for this inspection.

1926.100 A

Serious Gravity 1 1 instance 3 exposed
Issued
Oct 28, 2020
Abate by
Nov 4, 2020
Penalty
Initial $1,561 · Current $1,561
29 CFR 1926.100(a): Employees working in areas where there was a possible danger of head injury from impact, or falling or flying objects, or from electrical shock and burns, were not protected by protective helmets:  a) At the jobsite, employees conducting work on the ground below employees installing decking materials were not provided head protection, exposing employees to the hazard of head injuries.
Recent events (1)
  • — Z (S) $1561

1926.102 A01

Serious Gravity 1 1 instance 3 exposed
Issued
Oct 28, 2020
Abate by
Nov 4, 2020
Penalty
Initial $0 · Current $0
29 CFR 1926.102(a)(1): The employer did not ensure that each affected employee used appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation:  a) At the jobsite, employees were not wearing safety glasses, exposing employees to the hazard of eye injuries from flying particles when using hand grinders.
Recent events (1)
  • — Z (S) $0

1926.300 B01

Serious Gravity 1 1 instance 1 exposed
Issued
Oct 28, 2020
Abate by
Nov 4, 2020
Penalty
Initial $1,561 · Current $1,561
29 CFR 1926.300(b)(1): Power operated tool(s), designed to accommodate guards, were not equipped with such guards when in use:  a) At the jobsite, a DeWalt Angle Grinder was missing its guard, exposing the employee to struck by hazards.
Recent events (1)
  • — Z (S) $1561

1926.451 E01

Serious Gravity 1 1 instance 2 exposed
Issued
Oct 28, 2020
Abate by
Nov 4, 2020
Penalty
Initial $1,561 · Current $1,561
29 CFR 1926.451(e)(1): When scaffold platforms were more than 2 feet (0.6 m) above or below a point of access, portable ladders, hook-on ladders, attachable ladders, stair towers (scaffold stairways/towers), stairway-type ladders (such as ladder stands), ramps, walkways, integral prefabricated scaffold access, or direct access from other scaffold, structure, personnel hoist, or similar surface was not used:  a) At the jobsite, employees were using a SkyJack scissor lift to gain access to the upper level of the commercial property under construction by climbing on the guardrails of the scissor lift after it was raised, exposing employees to a fall hazard of approximately 17 feet.
Recent events (1)
  • — Z (S) $1561

1926.454 B

Serious Gravity 5 1 instance 2 exposed
Issued
Oct 28, 2020
Abate by
Nov 17, 2020
Penalty
Initial $0 · Current $0
29 CFR 1926.454(b): The employer did not have each employee involved in erecting, disassembling, moving, operating, repairing, maintaining, or inspecting a scaffold trained by a competent person to recognize any hazards associated with the work in question:  a) At the jobsite, the employer did not provide training that prohibited employees from standing on the guardrails of the SkyJack SJ III 3219 Scissor Lift to gain access to the upper level of the commercial property under construction, exposing the employee to the hazard of falling approximately 17 feet.
Recent events (1)
  • — Z (S) $0

1926.501 B01

Serious Gravity 1 1 instance 2 exposed
Issued
Oct 28, 2020
Abate by
Nov 4, 2020
Penalty
Initial $1,561 · Current $1,561
29 CFR 1926.501(b)(1): Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems:  a) At the jobsite, two employees installing decking on the commercial property under construction were not protected from falls over 6 feet.
Recent events (1)
  • — Z (S) $1561

View Casillas Enterprises's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344971346.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.