NORTHLAKE, TX —
OSHA Inspection: M&M FRAMING, LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of M&M FRAMING, LLC in 3408 STARDUST LANE, NORTHLAKE, TX 76226 (NAICS 238130). OSHA activity number 344977053.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- M&M FRAMING, LLC
- Site address
- 3408 STARDUST LANE
- City
- NORTHLAKE
- State
- TX
- ZIP
- 76226
- Mailing
- 1410 KILKENNY DRIVE, ARLINGTON, TX 76002
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 4
- Ownership type
- A
Citations
5 citations on file for this inspection.
1926.100 A
- Issued
- Oct 12, 2020
- Abate by
- Nov 9, 2020
- Penalty
- Initial $3,470 · Current $2,082 Reduced
General-duty citation text
29 CFR 1926.100(a): Employees were not protected by protective helmets while working in areas where there was a possible danger of head injury from impact, or from falling or flying objects, or from electrical shock and burns. At the jobsite, employees were not wearing hardhats while working below other employees that were installing framing material to a residential house, exposing employees to struck-by hazards from falling objects. .
Recent events (2)
- — I (S) $2082
- — Z (S) $3470
1926.102 A01
- Issued
- Oct 12, 2020
- Abate by
- Nov 9, 2020
- Penalty
- Initial $3,470 · Current $2,082 Reduced
General-duty citation text
29 CFR 1926.102(a)(1): Eye and face protective equipment were not used when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents. At the jobsite, employees operating Hitachi nail guns while performing framing activities were not wearing eye protection, exposing employees to the hazard of being struck by flying objects.
Recent events (2)
- — I (S) $2082
- — Z (S) $3470
1926.416 E01
- Issued
- Oct 12, 2020
- Abate by
- Nov 9, 2020
- Penalty
- Initial $2,313 · Current $1,388 Reduced
General-duty citation text
29 CFR 1926.416(e)(1): Worn or frayed electric cords or cables were used: At the jobsite, employees performing framing activities using a red and green extension cords were severely cut and frayed, supplying power to a circular saw, exposing employees to electrical hazards.
Recent events (2)
- — I (S) $1387.8
- — Z (S) $2313
1926.501 B13
- Issued
- Oct 12, 2020
- Abate by
- Nov 9, 2020
- Penalty
- Initial $4,048 · Current $2,429 Reduced
General-duty citation text
29 CFR 1926.501(b)(13): Each employee engaged in residential construction activities 6 feet or more above lower levels was not protected by guardrail systems, safety net systems, or personal fall arrest system. At the jobsite, employees performing framing activities were not provided fall protection and exposed to an unprotected fall hazard at a height of over 6 feet to the ground below.
Recent events (2)
- — I (S) $2428.8
- — Z (S) $4048
1926.503 A01
- Issued
- Oct 12, 2020
- Abate by
- Nov 9, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards: At the jobsite, employees performing framing activities were not provided fall protection. The employer did not provide a training program with hazard recognition and avoidance training where part of the job is to be exposed to fall hazards at a heights over 6 feet to the ground below.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at M&M Framing, LLC
View M&M Framing, LLC's full OSHA safety record →
More inspections in this industry (NAICS 238130)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344977053.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.