Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: WOODSTOCK FARMS MANUFACTURING

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of WOODSTOCK FARMS MANUFACTURING in 98 EXECUTIVE AVE., EDISON, NJ 08817 (NAICS 424490). OSHA activity number 344981246.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Woodstock Farms Manufacturing — free Get an email when a new federal OSHA severe-injury report for Woodstock Farms Manufacturing is published. One employer, no account, unsubscribe in one click.
Site address
98 EXECUTIVE AVE.
City
EDISON
State
NJ
ZIP
08817
Mailing
98 EXECUTIVE AVE., EDISON, NJ 08817
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
A
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
424490
Employees
80
Ownership type
A

5 citations on file for this inspection.

1910.147 C01

Serious Gravity 10 1 instance 1 exposed
Issued
Apr 2, 2021
Abate by
Apr 21, 2021
Penalty
Initial $9,557 · Current $8,000 Reduced
29 CFR  1910.147(a)(3)(i): 29 CFR 1910.147(a)(3)(i) The employer did not establish a program and utilize procedures for affixing appropriate lockout devices or tagout devices to energy isolating devices, and to otherwise disable machines or equipment to prevent unexpected energization, start up or release of stored energy in order to prevent injury to employees:  A) Woodstock Farms, 96 Executive Ave, Edison, NJ 08817  The employer did not establish an adequate energy control program to ensure employee training, energy isolating procedures, and periodic inspections before employees engaged in service or maintenance activities.   Exposure on or about 10/19/2020.
Recent events (3)
  • — J (S) $8000
  • — C (S) $9557
  • — Z (S) $9557

1910.147 C06 I

Serious Gravity 10 1 instance 2 exposed
Issued
Apr 2, 2021
Abate by
Apr 21, 2021
Penalty
Initial $0 · Current $0
29 CFR  1910.147(c)(6)(i):The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirements of this standard are being followed.  A) Woodstock Farms, 96 Executive Ave, Edison, NJ 08817 - Ames Bagging Machine  The employer did not ensure periodic inspections were performed to assist and protect employees engaged in production activities from unexpected release of stored energy. Equipment such as but not limited to the Ames Bagging machine.  Exposure on or about 10/19/2020.
Recent events (3)
  • — J (S) $0
  • — C (S) $0
  • — Z (S) $0

1910.147 C07 I A

Deleted Serious Gravity 5 1 instance 2 exposed
Issued
Apr 2, 2021
Abate by
Apr 21, 2021
Penalty
Initial $8,192 · Current $0 Reduced
29 CFR  1910.147(c)(7)(i)(A): Authorized employee(s) did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation and control.  A) Woodstock Farms, 96 Executive Ave, Edison, NJ 08817 - Whirlwind Warthog Declumper Machine  An employee engaged in clearing a jam on the Whirlwind Warthog Declumper machine was not provided adequate Lock/out tag out training exposing the employee to amputation hazards.   Exposure on or about 10/19/2020.
Recent events (3)
  • — J (S) $0
  • — C (S) $8192
  • — Z (S) $8192

1910.147 C04 I

Serious Gravity 5 1 instance 1 exposed
Issued
Apr 2, 2021
Abate by
Apr 21, 2021
Penalty
Initial $6,827 · Current $5,500 Reduced
29 CFR 1910.147(d)(1) The employer did not ensure that before an authorized or affected employee turns off a machine or equipment, the authorized employee had knowledge of the type and magnitude of the energy, the hazards of the energy to be controlled, and the method or means to control the energy:  A) Woodstock Farms, 96 Executive Ave, Edison, NJ 08817  The employer did not ensure that employees performing servicing activities on the Whirlwind Warthog Declumper Machine Serial   Number 2102, before turning off themachine, had adequate knowledge of the hazards of the energy to be controlled, and the method or means to control the energy, including proper procedures for shutting down the machine. Exposure on or about 10/19/2020
Recent events (3)
  • — J (S) $5500
  • — C (S) $6827
  • — Z (S) $6827

1910.147 C07 IV

Other-than-serious 1 instance 5 exposed
Issued
Apr 2, 2021
Abate by
Apr 21, 2021
Penalty
Initial $767 · Current $500 Reduced
29 CFR  1910.147(c)(7)(iv): The employer did not certify that employee training had been accomplished and kept up to date. The certification did not contain each employee's name and dates of training.  A) Woodstock Farms, 96 Executive Ave, Edison, NJ 08817 - Throughout Production Area  The employer did not certify that lock out/tag out training was conducted.   Exposure on or about 10/19/2020.
Recent events (3)
  • — J (O) $500
  • — C (O) $767
  • — Z (O) $767

View Woodstock Farms Manufacturing's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344981246.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.