OKLAHOMA CITY, OK ·
OSHA Inspection: ATLAS PAVING COMPANY
Fatality or catastrophe inspection · Safety discipline
At a glance
On , OSHA opened a fatality or catastrophe safety inspection of ATLAS PAVING COMPANY in HILL STREET AND N. WESTERN NEAR NW 32ND WESTERN, OKLAHOMA CITY, OK 73107 (NAICS 237310). OSHA activity number 345030233.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ATLAS PAVING COMPANY
- Site address
- HILL STREET AND N. WESTERN NEAR NW 32ND WESTERN
- City
- OKLAHOMA CITY
- State
- OK
- ZIP
- 73107
- Mailing
- 701 N. PORTLAND AVENUE, OKLAHOMA CITY, OK 73107
What kind of inspection was it?
- Inspection type
- Fatality or catastrophe (M)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 237310
- Employees
- 53
- Ownership type
- Private (A)
Citations
5 citations on file for this inspection.
1910.177 D04 I
- Issued
- May 7, 2021
- Abate by
- May 26, 2021
- Penalty
- Initial $6,827 · Current $4,000 Reduced
General-duty citation text
29 CFR 1910.177(d)(4)(i): The employer did not assure that employees use a clip-on chuck when inflating tires on rim wheels. On or about November 17, 2020 and at times prior thereto, the employer did not provide a clip-on chuck to secure the air hose to the valve stem of the tire. This exposes the employees servicing the tires to struck-by hazards.
Recent events (2)
- · I (S) $4000
- · Z (S) $6827
1910.177 D04 II
- Issued
- May 7, 2021
- Abate by
- May 26, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.177(d)(4)(ii): The employer did not furnish an air line assembly which included an in-line valve with a pressure gauge or a presettable regulator for inflating tires on rim wheels. On or about November 17, 2020 and at times prior thereto, the employer did not provide an in-line valve with pressure gauge or a presettable regulator to ensure accurate pressure read out at point of use. This exposes the employees servicing the tires to struck-by hazards.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.177 F
- Issued
- May 7, 2021
- Abate by
- May 26, 2021
- Penalty
- Initial $6,827 · Current $0 Reduced
General-duty citation text
29 CFR 1910.177(f): The employer did not establish a safe operating procedure for servicing multi-piece rim wheels which contained, at a minimum, the elements listed in 29 CFR 1910.177(f)(1) through (11). On or about November 17, 2020 and at times prior thereto, the employer did not establish a safe operating procedure for servicing multi-piece rim wheels and assure that employees are instructed in and follow the procedure. This exposes the employees servicing the tires to struck-by hazards.
Recent events (2)
- · I (S) $0
- · Z (S) $6827
1910.177 F10
- Issued
- May 7, 2021
- Abate by
- May 26, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.177(f)(10): The employer did not ensure that employees stayed out of the trajectory whenever multi-piece rim wheels are handled. On or about November 17, 2020 and at times prior thereto, the employer did not ensure employees stay out of the trajectory when inflating tires. This exposes the employees to struck-by hazards.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.177 C01
- Issued
- May 7, 2021
- Abate by
- May 26, 2021
- Penalty
- Initial $6,827 · Current $4,000 Reduced
General-duty citation text
29 CFR 1910.177(c)(1): The employer did not provide a program to train all employees who service rim wheels in the hazards involved and the safety procedures to follow while servicing rim wheels. On or about November 17, 2020 and at times prior thereto, the employer did not provide a training program for employees who service rim wheels. This exposed the employees to struck by hazards.
Recent events (2)
- · I (S) $4000
- · Z (S) $6827
More inspections at Atlas Paving Company
View Atlas Paving Company's full OSHA safety record →
More inspections in this industry (NAICS 237310)
More inspections in OK
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 345030233.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.