ATCHISON, KS —
OSHA Inspection: THE STRESSCRETE GROUP
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of THE STRESSCRETE GROUP in 14503 WALLICK RD., ATCHISON, KS 66002 (NAICS 327332). OSHA activity number 345085682.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- THE STRESSCRETE GROUP
- Site address
- 14503 WALLICK RD.
- City
- ATCHISON
- State
- KS
- ZIP
- 66002
- Mailing
- 14503 WALLICK RD., ATCHISON, KS 66002
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 327332
- Employees
- 47
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.212 A03 II
- Issued
- Jan 28, 2021
- Penalty
- Initial $6,827 · Current $3,755 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii):Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): At the Maintenance Shop, employees engaged in manufacturing activities were exposed to amputation hazards in that the blade on the JET Horizontal Bandsaw was not guarded properly.
Recent events (2)
- — I (S) $3754.85
- — Z (S) $6827
1910.212 A05
- Issued
- Jan 28, 2021
- Penalty
- Initial $4,096 · Current $2,253 Reduced
General-duty citation text
29 CFR 1910.212(a)(5):Fan blade guard(s) were not provided where the periphery of the blades was less than seven feet from the floor or working level: In the Staging Area, employees engaged in production activities were exposed amputation and laceration hazard in that the 36 inches diameter fan had an approximately one inch opening on the blade guard.
Recent events (2)
- — I (S) $2252.8
- — Z (S) $4096
1910.212 B
- Issued
- Jan 28, 2021
- Penalty
- Initial $8,192 · Current $4,506 Reduced
General-duty citation text
29 CFR 1910.212(b):Machine(s) designed for fixed location(s) were not securely anchored to prevent walking or moving: Employees engaged in production and maintenance activities, were exposed to struck-by hazards in that the equipment was not securely anchored to prevent walking or moving in the following instances: 1) Baldor Pedestal Grinder in Maintenance Shop 2) Mississippi Drill Press in the Maintenance Shop 3) Shopcraft Pedestal Grinder in the Finishing Department
Recent events (2)
- — I (S) $4505.6
- — Z (S) $8192
1910.215 B09
- Issued
- Jan 28, 2021
- Penalty
- Initial $8,192 · Current $4,506 Reduced
General-duty citation text
29 CFR 1910.215(b)(9):The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch:(a) At the Setup Area, employees engaged in manufacturing activities at the DeWalt bench grinder were exposed to struck-by and caught in hazards in that the tongue guard was adjusted to approximately one and half inches from the grinding wheel.
Recent events (2)
- — I (S) $4505.6
- — Z (S) $8192
1910.242 B
- Issued
- Jan 28, 2021
- Penalty
- Initial $4,096 · Current $2,253 Reduced
General-duty citation text
29 CFR 1910.242(b):Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.: In the Maintenance Shop, employees engaged in maintenance activities were exposed to struck-by and impalement hazards in that approximately 100 psi air pressure for cleaning purposes.
Recent events (2)
- — I (S) $2252.8
- — Z (S) $4096
1910.252 B02 III
- Issued
- Jan 28, 2021
- Penalty
- Initial $8,192 · Current $4,506 Reduced
General-duty citation text
29 CFR 1910.252(b)(2)(iii):Workers and other persons adjacent to the welding area were not protected from the rays by noncombustible or flameproof screens or shields: At the Cages Area, employees engaged in production activities were exposed to radiant energy or light radiation in that welding screens were not provided to adjacent employees.
Recent events (2)
- — I (S) $4505.6
- — Z (S) $8192
1910.303 G01
- Issued
- Jan 28, 2021
- Penalty
- Initial $4,096 · Current $2,253 Reduced
General-duty citation text
29 CFR 1910.303(g)(1):Sufficient access and working space was not provided and maintained about all electric equipment (operating at 600 volts, nominal, or less to ground) to permit ready and safe operation and maintenance of such equipment: In the Cages Area, employees engaged in production activities were exposed to struck by, electrical, and fire hazards in that the service disconnect switches were obstructed by a little ring roller machine.
Recent events (2)
- — I (S) $2252.8
- — Z (S) $4096
More inspections at The Stresscrete Group
View The Stresscrete Group's full OSHA safety record →
More inspections in this industry (NAICS 327332)
More inspections in KS
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345085682.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.