MISSION, TX —
OSHA Inspection: TRIPLE A DUMP TRUCK SERVICE, L.L.C.
Federal Agency inspection · Safety discipline
At a glance
On , OSHA opened a federal Agency safety inspection of TRIPLE A DUMP TRUCK SERVICE, L.L.C. in 5627 WESTERN ROAD, MISSION, TX 78574 (NAICS 811111). OSHA activity number 345120463.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- TRIPLE A DUMP TRUCK SERVICE, L.L.C.
- Site address
- 5627 WESTERN ROAD
- City
- MISSION
- State
- TX
- ZIP
- 78574
- Mailing
- PO BOX 297, MISSION, TX 78573
What kind of inspection was it?
- Inspection type
- Federal Agency (M)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 811111
- Employees
- 16
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.157 E01
- Issued
- Jun 1, 2021
- Penalty
- Initial $5,461 · Current $2,730 Reduced
General-duty citation text
29 CFR 1910.157(e)(1): The employer shall be responsible for the inspection, maintenance and testing of all portable fire extinguishers in the workplace: On or about January 22, 2021, in the shop, employees engaged in welding activities were not provided with adequately inspected, maintained, and tested fire extinguishers in the following instances: a. Ansul Sentry, No. AY-251951, Model PK20; b. Amerex, Model A417; and, c. Kidde, No. F56239375.
Recent events (2)
- — I (O) $2730
- — Z (S) $5461
1910.252 A02 XIII C
- Issued
- Jun 1, 2021
- Abate by
- Jun 25, 2021
- Penalty
- Initial $5,461 · Current $5,461
General-duty citation text
29 CFR 1910.252(a)(2)(xiii)(C):The employer did not recognize its responsibility for the safe usage of cutting or welding equipment, and did not insist that cutters or welders and their supervisors were suitably trained in the safe operation of their equipment: On or about January 22, 2021, at this establishment, employees had not received training prior to engaging in torching cutting activities.
Recent events (2)
- — I (S) $5461
- — Z (S) $5461
1910.252 A03 I
- Issued
- Jun 1, 2021
- Abate by
- Jun 25, 2021
- Penalty
- Initial $5,461 · Current $0 Reduced
General-duty citation text
29 CFR 1910.252(a)(3)(i): Welding, cutting, or other hot work was performed on used drums, barrels, tanks, or other containers that had not been cleaned so thoroughly as to make absolutely certain there were no flammable materials present or any substance: On or about January 22, 2021, at this establishment, torching cutting activities performed on scrap, including a metal tank, were conducted without prior cleaning of the tank to ensure flammable materials were not present, inside the tank, exposing employees to deflagration.
Recent events (2)
- — I (S) $0
- — Z (S) $5461
1904.39 A02
- Issued
- Jun 1, 2021
- Penalty
- Initial $3,901 · Current $1,500 Reduced
General-duty citation text
29 CFR 1904.39(a)(2): The employer did not report within 24-hours a work-related incident resulting in in-patient hospitalization, amputation or the loss of an eye: An employee suffered a workplace injury resulting in an inpatient hospitalization which was not reported to OSHA within 24 hours.
Recent events (2)
- — I (O) $1500
- — Z (O) $3901
1910.132 D02
- Issued
- Jun 1, 2021
- Abate by
- Jun 25, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.132(d)(2):The employer did not verify that the required workplace hazard assessment has been performed through a written certification which included the requirements as outlined in 29 CFR 1910.132(d)(2): On or about January 22, 2021, employees engaged in maintenance/mechanical work and cutting equipment for scrap metal were exposed to known hazards of welding/torching. The employer did not ensure a hazard assessment was conducted by means of a written certification.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.141 D02 IV
- Issued
- Jun 1, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.141(d)(2)(iv): Lavatories were not provided with individual hand towels or sections thereof, of cloth or paper, warm air blowers or clean individual sections of continuous cloth toweling: On or about January 26, 2021, employees engaged in shop activities, including, but not limited to, welding, cutting, heavy equipment maintenance activities were not provided a means to dry their hands.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Triple a Dump Truck Service, L.L.C.
View Triple a Dump Truck Service, L.L.C.'s full OSHA safety record →
More inspections in this industry (NAICS 811111)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345120463.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.