OSHA Inspection: SEMO MILLING, LLC

Issued

Feb 24, 2021

Abate by

Apr 12, 2021

Penalty

Initial $9,557 · Current $4,779 Reduced

General-duty citation text

29 CFR  1910.147(c)(4)(i):  Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in the activities covered by this section.  Note: Exception: The employer need not document the required procedure for a particular machine or equipment, when all of the following elements exist: (1) The machine or equipment has no potential for stored or residual energy or reaccumulation of stored energy after shut down which could endanger employees; (2) the machine or equipment has a single energy source which can be readily identified and isolated; (3) the isolation and locking out of that energy source will completely deenergize and deactivate the machine or equipment; (4) the machine or equipment is isolated from that energy source and locked out during servicing or maintenance; (5) a single lockout device will achieve a locker-out condition; (6) the lockout device is under the exclusive control of the authorized employee performing the servicing or maintenance; (7) the servicing or maintenance does not create hazards for other employees; and (8) the employer, in utilizing this exception, has had no accidents involving the unexpected activation or reenergization of the machine or equipment during servicing or maintenance.  On or about 2/18/2021, SEMO Milling, LLC DBA Tiger Soy, LLC had not developed, documented and utilized procedures for the control of potentially hazardous energy for  several machines in the plant to include, but not limited to a Single Screw Extruder BASH-C machine.