GLENDALE, NY —
OSHA Inspection: LUIS BELTRAN
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of LUIS BELTRAN in 7931 60TH LN, GLENDALE, NY 11385 (NAICS 238170). OSHA activity number 345200042.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- LUIS BELTRAN
- Site address
- 7931 60TH LN
- City
- GLENDALE
- State
- NY
- ZIP
- 11385
- Mailing
- 9 AUGUSTINA ST, INWOOD, NY 11096
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238170
- Employees
- 2
- Ownership type
- A
Citations
5 citations on file for this inspection.
1926.451 B01
- Issued
- Jun 23, 2021
- Penalty
- Initial $2,926 · Current $2,926
General-duty citation text
29 CFR 1926.451(b)(1): Platform(s) on all working levels of scaffolds, were not fully planked or decked between the front uprights and guardrail supports such that the space between adjacent units, and the space between the platform and the uprights. a) Worksite, 7931 60th Lane, Glendale, New York 11385: On or about March 17, 2021, employees were performing vinyl siding installation work from a four-tier fabricated frame scaffold approximately 20-feet above the ground. The platform the employees were working from was not fully planked. Note: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19.
Recent events (1)
- — Z (S) $2926
1926.451 E01
- Issued
- Jun 23, 2021
- Penalty
- Initial $2,926 · Current $2,926
General-duty citation text
29 CFR 1926.451(e)(1): When scaffold platforms were more than 2 feet (0.6 m) above or below a point of access, portable ladders, hook-on ladders, attachable ladders, stair towers (scaffold stairways/towers), stairway-type ladders (such as ladder stands), ramps, walkways, integral prefabricated scaffold access, or direct access from other scaffold, structure, personnel hoist, or similar surface was not used: a) Worksite, 7931 60th Lane, Glendale, New York 11385: On or about March 17, 2021, employees were accessing the fourth tier of the fabricated frame scaffold approximately 20-feet above the ground by climbing on the end frames and cross bracing. Note: Because abatement of this violation is already documented in the case file, the employer need not submit certification of documentation of abatement for this violation as normally required by CFR 1903.19.
Recent events (1)
- — Z (S) $2926
1926.451 G04 I
- Issued
- Jun 23, 2021
- Penalty
- Initial $2,926 · Current $2,926
General-duty citation text
29 CFR 1926.451(g)(4)(i):Guardrail systems were not installed along all open sides and ends of platforms before being released for use by employees other than erection/dismantling crews: a) Worksite, 7931 60th Lane, Glendale, New York 11385: On or about March 17, 2021, employees were performing vinyl siding installation work from a fabricated frame scaffold approximately 20-feet above the ground and did not have a guardrail system installed along all open sides and ends of the scaffold. Note: Because abatement of this violation is already documented in the case file, the employer need not submit certification or documentation of abatement for this violation as normally required by CFR 1903.19.
Recent events (1)
- — Z (S) $2926
1926.454 A
- Issued
- Jun 23, 2021
- Abate by
- Jul 6, 2021
- Penalty
- Initial $2,926 · Current $2,926
General-duty citation text
29 CFR 1926.454(a):The employer did not have each employee who performed work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards. a) Worksite, 7931 60th Lane, Glendale, New York 11385: On or about March 17, 2021, employees who were authorized to work from scaffolds had not received training by a person qualified in the subject matter to recognize the hazards associated with fabricated frame scaffolds and to understand the procedures to control or minimize those hazards. Note: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19.
Recent events (1)
- — Z (S) $2926
1926.1053 B04
- Issued
- Jun 23, 2021
- Penalty
- Initial $2,926 · Current $2,926
General-duty citation text
29 CFR 1926.1053(b)(4):Ladder(s) were used for purposes other than the purpose for which they were designed: a) Worksite, 7931 60th Lane, Glendale, New York 11385: On or about March 17, 2021, employees were working from an aluminum extension ladder set up perpendicular of the residential building on the porch overhang approximately 20-feet above the ground with a wood plank placed between the rung of the ladder and the platform of the fabricated frame scaffold. Note: Because abatement of this violation is already documented in the case file, the employer need not submit certification or documentation of abatement for this violation as normally required by CFR 1903.19.
Recent events (1)
- — Z (S) $2926
More inspections at Luis Beltran
View Luis Beltran's full OSHA safety record →
More inspections in this industry (NAICS 238170)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345200042.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.