MONTGOMERY, AL —
OSHA Inspection: CONNER INDUSTRIES, INC.
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of CONNER INDUSTRIES, INC. in 3321 THOMASON AVENUE, MONTGOMERY, AL 36108 (NAICS 321920). OSHA activity number 345254031.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CONNER INDUSTRIES, INC.
- Site address
- 3321 THOMASON AVENUE
- City
- MONTGOMERY
- State
- AL
- ZIP
- 36108
- Mailing
- 3321 THOMASON AVENUE, MONTGOMERY, AL 36108
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321920
- Employees
- 20
- Ownership type
- A
Citations
6 citations on file for this inspection.
5(a)(1)
- Issued
- Aug 27, 2021
- Penalty
- Initial $7,047 · Current $6,500 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which was free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to amputation hazards: a) Fabrication area: On or about April 6, 2021 and at times prior, employees were exposed to amputation hazards while operating compound miter saws with a damaged/disabled saw blade guard installed while cutting 2x4 and 4x4 boards.
Recent events (2)
- — I (S) $6500
- — Z (S) $7047
1910.22 A01
- Issued
- Aug 27, 2021
- Penalty
- Initial $7,047 · Current $0 Reduced
General-duty citation text
29 CFR 1910.22(a)(1): The employer did not ensure that all places of employment, passageways, storerooms, service rooms, and walking-working surfaces are kept in a clean, orderly, and sanitary condition. a) Production area; On or about April 6, 2021 the employer exposed employees to slip and trip hazards in that employees were required to walk and work in areas that had large quantities of used scrap wood and wood dust piled and spread around the equipment and walking areas.
Recent events (2)
- — I (O) $0
- — Z (S) $7047
1910.305 B01 I
- Issued
- Aug 27, 2021
- Penalty
- Initial $7,047 · Current $6,500 Reduced
General-duty citation text
29 CFR 1910.305(b)(1)(i):Conductors entering cutout boxes, cabinets, or fittings were not protected from abrasions: (a) Cam Saw 16; On or about April 6, 2021, the employer exposed employees to electrical hazards in that employees were allowed to walk and work around an 220V electrical junction/control box with multiple conductors entering holes/openings in the box and the conductors were not protected from abrasion. (b) Cam Saw 16; On or about April 6, 2021, the employer exposed employees to electrical hazards in that employees were allowed to work around a 220 volt electric motor with an electrical junction box with conductors entering a fitting in the box without the conductors being protected from abrasion.
Recent events (2)
- — I (O) $6500
- — Z (S) $7047
1910.305 B01 II
- Issued
- Aug 27, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(b)(1)(ii):Unused openings in boxes, cabinets, or fittings were not effectively closed: (a) Cam Saw 16; On or about April 6, 2021, the employer exposed employees to electrical hazards in that employees were allowed to access a 220V electrical junction box with an open hole exposing live electrical parts.
Recent events (2)
- — I (O) $0
- — Z (S) $0
1910.95 D01
- Issued
- Aug 27, 2021
- Abate by
- Sep 23, 2021
- Penalty
- Initial $0 · Current $0
81108111
General-duty citation text
29 CFR 1910.95(d)(1):When information indicated that any employee's exposure equaled or exceed the 8-hour time-weighted average of 85 decibels, the employer did not develop and implement a monitoring program: a) Facility: On or about April 22, 2021; the employer failed to to implement a noise monitoring program where employees operating equipment in the facility were exposed to noise levels in excess of the 90 dBa 8 hour time weighted average permissible exposure level for noise.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.95 L01
- Issued
- Aug 27, 2021
- Penalty
- Initial $0 · Current $0
81108111
General-duty citation text
29 CFR 1910.95(l)(1):The employer did not post of copy of 29 CFR 1910.95 in the workplace: a) Facility: On or about April 22, 2021; the employer failed to post a copy of the hearing conservation standard where employees exposed over the 85dBa action level have ready access to it.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Conner Industries, INC.
View Conner Industries, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 321920)
More inspections in AL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345254031.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.