Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: CONNER INDUSTRIES, INC.

Planned inspection · Health discipline

On , OSHA opened a planned health inspection of CONNER INDUSTRIES, INC. in 3615 SECURITY STREET, GARLAND, TX 75042 (NAICS 326150). OSHA activity number 348089285.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Conner Industries, INC. — free Get an email when a new federal OSHA severe-injury report for Conner Industries, INC. is published. One employer, no account, unsubscribe in one click.
Site address
3615 SECURITY STREET
City
GARLAND
State
TX
ZIP
75042
Mailing
3615 SECURITY STREET, GARLAND, TX 75042
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
326150
Employees
45
Ownership type
A

5 citations on file for this inspection.

1910.132 D02

Serious Gravity 1 1 instance 6 exposed
Issued
Aug 29, 2025
Abate by
Sep 25, 2025
Penalty
Initial $8,512 · Current $5,107 Reduced
29 CFR  1910.132(d)(2): The employer did not verify that the required workplace hazard assessment has been performed through a written certification that identifies the workplace evaluated, the person certifying that the evaluation has been performed, the date(s) of the hazard assessment, and, which identifies the document as a certification of hazard assessment:  (a) On or about March 26, 2025, the employer had not verified that a workplace hazard assessment had been performed through a written certification.  In the foam assembly area, employees were exposed to skin contact hazards when dispensing and spraying adhesive that contained 60-65% methylene chloride.
Recent events (2)
  • — I (S) $5107.2
  • — Z (S) $8512

1910.1052 H01

Serious Gravity 1 1 instance 6 exposed
Issued
Aug 29, 2025
Abate by
Sep 25, 2025
Penalty
Initial $0 · Current $0
29 CFR  1910.1052(h)(1): Where needed to prevent methylene chloride induced skin or eye irritation, the employer did not provide clean protective clothing and equipment resistant to methylene chloride, at no cost to the employee, and/or did not ensure that each affected employee used it:  (a) On or about March 26, 2025, and at times prior to and after, in the foam assembly area, employees were exposed to skin contact hazards when dispensing and spraying adhesive that contained 60-65% methylene chloride.  The employer did not provide and require employees to wear protective clothing and equipment such as gloves and aprons that were resistant to methylene chloride.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.1052 L03 I

Serious Gravity 5 1 instance 6 exposed
Issued
Aug 29, 2025
Abate by
Sep 25, 2025
Penalty
Initial $14,188 · Current $8,513 Reduced
29 CFR  1910.1052(l)(3)(i): The employer did not inform each affected employee of the requirements of 29 CFR 1910.1052 and the information available in its appendices and/or how to access or obtain a copy of it in the workplace:  (a) On or about March 26, 2025, in the foam assembly area, employees dispensing and spraying adhesive that contained 60-65% methylene chloride had not been informed of the requirements of 29 CFR 1910.1052 and the information in its appendices and how to access or obtain a copy of it in the workplace.
Recent events (2)
  • — I (S) $8512.8
  • — Z (S) $14188

1910.1200 G08

Serious Gravity 5 1 instance 6 exposed
Issued
Aug 29, 2025
Abate by
Sep 25, 2025
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(g)(8): The employer did not maintain in the workplace copies of the required safety data sheets for each hazardous chemical, and did not ensure that they were readily accessible during each work  shift to employees when they were in their work area(s):  (a) On or about March 26, 2025, in the foam assembly area, employees dispensing and spraying adhesive that contained 60-65% methylene chloride did not have access to the safety data sheet for the adhesive.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.1052 D02

Other-than-serious 1 instance 6 exposed
Issued
Aug 29, 2025
Abate by
Sep 25, 2025
Penalty
Initial $1,594 · Current $956 Reduced

Hazardous substances 1730

29 CFR  1910.1052(d)(2): The employer did not perform initial monitoring to determine each employee's exposure to methylene chloride:  (a) On or about March 26, 2025, in the foam assembly area where employees sprayed adhesive that contained 60-65% methylene chloride, the employer had not performed initial monitoring to determine employees' 8-hour time-weighted average exposures or 15-minute short-term exposures to methylene chloride.
Recent events (2)
  • — I (O) $956.4
  • — Z (O) $1594

View Conner Industries, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348089285.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.