CANTON, OH —
OSHA Inspection: CASE FARMS PROCESSING, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of CASE FARMS PROCESSING, INC. in 1925 30TH ST. NE, CANTON, OH 44705 (NAICS 311615). OSHA activity number 345274435.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CASE FARMS PROCESSING, INC.
- Site address
- 1925 30TH ST. NE
- City
- CANTON
- State
- OH
- ZIP
- 44705
- Mailing
- 1925 30TH ST. NE, CANTON, OH 44705
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 311615
- Employees
- 490
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.147 C04 II
- Issued
- Aug 4, 2021
- Abate by
- Sep 21, 2021
- Penalty
- Initial $13,653 · Current $6,827 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(ii):The procedures shall clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, and the means to enforce compliance including, but not limited to, the following: On or about April 15, 2021, the employer did not ensure the control of hazardous energy procedure for the Paw Picker Machine clearly and specifically outlined the techniques to utilize the control of the hazardous energy and unexpected energization of the electrical energy of the machine. The procedure did not include the specific procedural steps for isolating the electrical energy [per 1910.147(c)(4)(ii)(B)], placement of lockout device(s) on the energy isolation device [(c)(4)(ii)(C)], and/or requirements for the testing the machine to verify the effectiveness of the lockout devices and other energy control measures [(c)(4)(ii)(D).
Recent events (2)
- — I (O) $6827
- — Z (S) $13653
1910.147 C06 I
- Issued
- Aug 4, 2021
- Abate by
- Sep 21, 2021
- Penalty
- Initial $13,653 · Current $13,653
General-duty citation text
29 CFR 1910.147(c)(6)(i):The employer shall conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirements of this standard are being followed. On or about April 15, 2021, the employer did not ensure a periodic inspections of the Paw Picker Machine energy control procedure was conducted at least annually to correct any deviations or inadequacies in the procedure and the requirements of the standard were being followed.
Recent events (2)
- — I (S) $13653
- — Z (S) $13653
1910.147 C04 I
- Issued
- Aug 4, 2021
- Abate by
- Sep 21, 2021
- Penalty
- Initial $75,092 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i):Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section. On or about April 15, 2021, the employer did not ensure maintenance technicians performing service activities on the Paw Picker Machine utilized an energy control procedure to control the hazardous electrical energy of the machine, while replacing the rails of the machine. CASE FARMS PROCESSING, INC., WAS PREVIOUSLY CITED FOR A VIOLATION OF THIS OCCUPATIONAL SAFETY AND HEALTH STANDARD OR ITS EQUIVALENT STANDARD, 29 CFR 1910.147(c)(4)(i), WHICH WAS CONTAINED IN OSHA INSPECTION NUMBER 1048762, CITATION NUMBER 03, ITEM NUMBER 001a, AND WAS AFFIRMED AS A FINAL ORDER ON MARCH, 21, 2019, WITH RESPECT TO A WORK PLACE LOCATED AT 1925 30TH STREET, NE, CANTON, OHIO.
Recent events (2)
- — I (R) $0
- — Z (R) $75092
1910.147 D
- Issued
- Aug 4, 2021
- Abate by
- Sep 21, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(d):Application of control. The established procedures for the application of energy control (the lockout or tagout procedures) shall cover the following elements and actions and shall be done in the following sequence: On or about April 15, 2021, the employer did not ensure maintenance technicians' performing service by replacing the rails and fingers of the Paw Picker Machine applied and followed the established energy control procedures by; turning off or shutting down the machine [per 1910.147(d)(2)], isolating the machine from the electrical energy source [(d)(3)], affixing a lockout device [(d)(4)(i)], and verifying de-energization and isolation had been accomplished [(d)(6)], prior to servicing the machine. CASE FARMS PROCESSING, INC., WAS PREVIOUSLY CITED FOR A VIOLATION OF THIS OCCUPATIONAL SAFETY AND HEALTH STANDARD OR ITS EQUIVALENT STANDARD, 29 CFR 1910.147(d)(3), WHICH WAS CONTAINED IN OSHA INSPECTION NUMBER 1048762, CITATION NUMBER 01, ITEM NUMBER 002a, AND WAS AFFIRMED AS A FINAL ORDER ON MARCH, 21, 2019, WITH RESPECT TO A WORK PLACE LOCATED AT 1925 30TH STREET, NE, CANTON, OHIO.
Recent events (2)
- — I (R) $0
- — Z (R) $0
More inspections at Case Farms Processing, INC.
View Case Farms Processing, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 311615)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345274435.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.