Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: RIDGE CORPORATION

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of RIDGE CORPORATION in 5777 RAIDERS RD, FRAZEYSBURG, OH 43822 (NAICS 326113). OSHA activity number 345281141.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Ridge Corporation — free Get an email when a new federal OSHA severe-injury report for Ridge Corporation is published. One employer, no account, unsubscribe in one click.
Establishment
RIDGE CORPORATION
Site address
5777 RAIDERS RD
City
FRAZEYSBURG
State
OH
ZIP
43822
Mailing
1201 ETNA PARKWAY ATTN: MANDY HOBBS, PATASKALA, OH 43062
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
326113
Employees
150
Ownership type
A

3 citations on file for this inspection.

1910.147 C04 I

Serious Gravity 10 1 instance 6 exposed
Issued
Jul 13, 2021
Abate by
Jul 23, 2021
Penalty
Initial $13,516 · Current $10,814 Reduced
29 CFR  1910.147(c)(4)(i):Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section.  a. On or before April 28, 2021, the employer failed to ensure employees utilized the written energy control procedure for the Rebecca Line Scatter Unit for the adjustment of the spread width and auger blades width. Supervisors did not enforce the energy control procedure as operators routinely adjusted the scatter unit width and auger width during normal production operations. This practice exposed employees to caught-in hazards of the scatter unit.
Recent events (2)
  • — I (S) $10813.6
  • — Z (S) $13516

1910.147 F03 II D

Serious Gravity 5 1 instance 6 exposed
Issued
Jul 13, 2021
Abate by
Jul 23, 2021
Penalty
Initial $9,655 · Current $0 Reduced
29 CFR  1910.147(f)(3)(ii)(D):Each authorized employee shall affix a personal lockout or tagout device to the group lockout device, group lockbox, or comparable mechanism when he or she begins work, and shall remove those devices when he or she stops working on the machine or equipment being serviced or maintained.  a. On or before April 28, 2021, the employer did not ensure that each authorized employee affixed a personal lockout or tagout device to the group lockout device, group lockbox, or comparable mechanism when employees began work, and removed those devices when the employee stopped working on the machine or equipment being serviced or maintained. Employees worked with maintenance personnel inside the laminator machine without participating in the group lockout of the machine, thereby exposed to caught-in hazards.
Recent events (2)
  • — I (S) $0
  • — Z (S) $9655

1910.147 C07 I A

Serious Gravity 10 1 instance 6 exposed
Issued
Jul 13, 2021
Abate by
Jul 23, 2021
Penalty
Initial $27,033 · Current $10,814 Reduced
29 CFR  1910.147(c)(7)(i)(A): Each authorized employee shall receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation and control.   a. On or before April 28, 2021, the employer did not provide training on the energy control program and procedures to be used by employees who performed servicing and maintenance on equipment such as, but not limited to, the Rebecca Line laminator.  b. On or before April 28, 2021, the employer did not provide training on the energy control program and procedures to be used by employees who performed servicing and maintenance on equipment such as, but not limited to, the Rebecca Line Scatter Unit.  Ridge Corporation was previously cited for a violation of this occupational safety and health standard 29 CFR 1910.147(c)(7)(i)(A), which was contained in OSHA inspection number 1172671, citation number 1, item number 1 and was affirmed as a final order on February 7, 2018 with respect to a workplace located at 5777 Raiders Rd, FRAZEYSBURG, OH 43822.
Recent events (2)
  • — I (S) $10813.6
  • — Z (R) $27033

View Ridge Corporation's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345281141.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.