CHICAGO, IL —
OSHA Inspection: J H SPELL & ASSOCIATES LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of J H SPELL & ASSOCIATES LLC in 3253 N. ELSTON AVE., CHICAGO, IL 60618 (NAICS 236118). OSHA activity number 345303879.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- J H SPELL & ASSOCIATES LLC
- Site address
- 3253 N. ELSTON AVE.
- City
- CHICAGO
- State
- IL
- ZIP
- 60618
- Mailing
- 17 E. MONROE ST. SUITE 220, CHICAGO, IL 60603
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 236118
- Employees
- 15
- Ownership type
- A
Citations
6 citations on file for this inspection.
1926.416 A01
- Issued
- May 26, 2021
- Abate by
- Jun 2, 2021
- Penalty
- Initial $5,461 · Current $3,660 Reduced
General-duty citation text
29 CFR 1926.416(a)(1): Employees were permitted to work in proximity to electric power circuits and were not protected against electric shock by de-energizing and grounding the circuits or effectively guarding the circuits by insulation or other means: a) On or about May 11, 2021, employees were not protected against contact with energized overhead power lines during masonry and carpentry work. The overhead power lines consisted of secondary lines having a voltage rating of 120/240 Volts. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
- — I (S) $3660
- — Z (S) $5461
1926.501 B01
- Issued
- May 26, 2021
- Abate by
- Jun 2, 2021
- Penalty
- Initial $5,461 · Current $3,660 Reduced
General-duty citation text
29 CFR 1926.501(b)(1): Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems: a) On May 11, 2021, employees engaged in construction work were not protected from fall hazards of approximately 25 feet to the ground, while working along an unprotected edge of the deck. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
- — I (S) $3660
- — Z (S) $5461
1926.501 B03
- Issued
- May 26, 2021
- Abate by
- Jun 2, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.501(b)(3): Each employee in a hoist area was not protected from falling 6 feet (1.8 m) or more to lower levels by guardrail systems or personal fall arrest systems: a) On May 11, 2021, employees were exposed to the hazard of falling approximately 25 feet to the ground while working in the hoist area. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.701 B
- Issued
- May 26, 2021
- Abate by
- Jun 2, 2021
- Penalty
- Initial $3,901 · Current $2,680 Reduced
General-duty citation text
29 CFR 1926.701(b): All protruding reinforcing steel, onto and/or into which employees could fall or come against, was not guarded to eliminate the hazard of impalement: a) On May 11, 2021, employees engaged in construction work were exposed to the hazard of impalement due to reinforcing steel being unprotected. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (S) $2680
- — Z (S) $3901
1910.178 L01 I
- Issued
- May 26, 2021
- Abate by
- Jun 29, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.602(d): Note: The requirements applicable to construction work under paragraph (d) of this section are identical to those set forth at paragraph (l) of 29 CFR 1910.178: 29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator was competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l): a) On or about May 11, 2021, the employer did not train and evaluate employees operating the JLG Lull 644E-42 all-terrain forklift. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (O) $0
- — Z (O) $0
1926.503 B01
- Issued
- May 26, 2021
- Abate by
- Jun 29, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.503(b)(1): The employer did not verify compliance with paragraph (a) of this section by preparing a written (training) certification record including the name or other identity of the employee trained, the date(s) of the training, and the signature of the person who conducted the training or the signature of the employer: a) On or about May 11, 2021, the employer did not maintain records or certification of fall protection training for employees exposed to fall hazards. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at J H Spell & Associates LLC
View J H Spell & Associates LLC's full OSHA safety record →
More inspections in this industry (NAICS 236118)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345303879.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.