CARLSTADT, NJ —
OSHA Inspection: TRIBECA OVEN, INC.
Referral inspection · Health discipline
At a glance
On , OSHA opened a referral health inspection of TRIBECA OVEN, INC. in 447 GOTHAM PARKWAY, CARLSTADT, NJ 07072 (NAICS 311812). OSHA activity number 345360390.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- TRIBECA OVEN, INC.
- Site address
- 447 GOTHAM PARKWAY
- City
- CARLSTADT
- State
- NJ
- ZIP
- 07072
- Mailing
- 447 GOTHAM PARKWAY, CARLSTADT, NJ 07072
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 311812
- Employees
- 322
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.147 C04 I
- Issued
- Dec 6, 2021
- Abate by
- Jan 10, 2022
- Penalty
- Initial $13,653 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i):Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a) 447 Production, Rack Shaping, Koenig: The employer did not ensure specific detailed procedures were utilized to shut down the machine and it's components while employees cleaned areas of the machine that contacts dough or may accumulate food residues, including but not limited to rotating forming drums, finger belts, various rollers, and conveyor belts. This exposed employees to the hazard of being caught by an in running nip point on or about June 11, 2021.
Recent events (3)
- — J (S) $0
- — C (S) $13653
- — Z (S) $13653
1910.147 C05 I
- Issued
- Dec 6, 2021
- Abate by
- Jan 10, 2022
- Penalty
- Initial $13,653 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(5)(i): Locks, tags, chains, wedges, key blocks, adapter pins, self-locking fasteners, or other hardware were not provided by the employer for isolating, securing or blocking of machines or equipment from energy sources: a) 447 Production, Rack Shaping, Koenig: Employees were not provided locks or other devices so they could lockout the machine and it's components while employees cleaned areas of the machine that contacts dough or may accumulate food residues, including but not limited to rotating forming drums, finger belts, various rollers, and conveyor belts. This exposed employees to the hazard of being caught by an in running nip point on or about June 11, 2021.
Recent events (3)
- — J (S) $0
- — C (S) $13653
- — Z (S) $13653
1910.147 C07 I A
- Issued
- Dec 6, 2021
- Abate by
- Jan 10, 2022
- Penalty
- Initial $13,653 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i)(A): Authorized employee(s) did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation and control: a) 447 Production, Rack Shaping, Koenig: The employer did not ensure training was provided to employees who cleaned areas of the machine that contacts dough or may accumulate food residues, including but not limited to rotating forming drums, finger belts, various rollers, and conveyor belts. This exposed employees to the hazard of being caught by an in running nip point on or about June 11, 2021.
Recent events (3)
- — J (S) $0
- — C (S) $13653
- — Z (S) $13653
1910.147 F03 II D
- Issued
- Dec 6, 2021
- Abate by
- Jan 10, 2022
- Penalty
- Initial $13,653 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(f)(3)(ii)(D): Each authorized employee shall affix a personal lockout or tagout device to the group lockout device prior to working on the machine or equipment: a) 447 Production, Rack Shaping, Koenig: Group lockout devices were not utilized by employees working as a team to clean the machine and attached conveyors, on or about June 11, 2021.
Recent events (3)
- — J (S) $0
- — C (S) $13653
- — Z (S) $13653
More inspections at Tribeca Oven, INC.
View Tribeca Oven, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 311812)
More inspections in NJ
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345360390.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.