FERRIS, TX —
OSHA Inspection: ATCO PRODUCTS, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of ATCO PRODUCTS, INC. in 601 I-45 SOUTH, FERRIS, TX 75125 (NAICS 336390). OSHA activity number 345367486.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ATCO PRODUCTS, INC.
- Site address
- 601 I-45 SOUTH
- City
- FERRIS
- State
- TX
- ZIP
- 75125
- Mailing
- 601 I-45 SOUTH, FERRIS, TX 75125
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 336390
- Employees
- 221
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.212 A03 III
- Issued
- Aug 27, 2021
- Penalty
- Initial $6,715 · Current $4,029 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(iii): Special hand tools for placing and removing material(s) was not provided to permit easy handling of material without the operator placing a hand in the danger zone: On or about June 9, 2021 and at times prior thereto, the employer did not ensure special hand tools were used when the machine guarding was not feasible to prevent employees from placing their hands into CNC bender #2 point of operation. Employees placed and retrieved tubing with their hands into the point of operation, exposing the employees to amputation hazards.
Recent events (2)
- — I (S) $4029
- — Z (S) $6715
1910.303 B07 I
- Issued
- Aug 27, 2021
- Abate by
- Sep 27, 2021
- Penalty
- Initial $8,778 · Current $5,267 Reduced
General-duty citation text
29 CFR 1910.303(b)(7)(i): Unused openings in boxes, raceways, auxiliary gutters, cabinets, equipment cases, or housings shall be effectively closed to afford protection substantially equivalent to the wall of the equipment. On or about June 16, 2021, and at times prior thereto, the employer did not ensure unused openings in electrical boxes and control panels were effectively closed, which exposed employees to potential electrical shocks hazards. 1. CNC Bender # 1 Control Pedestal 2. CNC Bender #2 Control Pedestal 3. CNC Bender #2 Control Panel 4. CNC Bender #2 Electrical disconnect box.
Recent events (2)
- — I (S) $5266.8
- — Z (S) $8778
1904.39 A02
- Issued
- Aug 27, 2021
- Abate by
- Sep 27, 2021
- Penalty
- Initial $5,000 · Current $3,000 Reduced
General-duty citation text
29 CFR 1904.39(a)(2): Within twenty-four (24) hours after the in-patient hospitalization of one or more employees or an employee's amputation or an employee's loss of an eye, as a result of a work-related incident, you must report the in-patient hospitalization, amputation, or loss of an eye to OSHA. On or about June 9, 2021, the employer did not report to OSHA a work related amputation within 24 hours of being notified of the employee injury and at the work site located in the CNC Bending Department located in Ferris, Texas.
Recent events (2)
- — I (O) $3000
- — Z (O) $5000
1904.41 A02
- Issued
- Aug 27, 2021
- Penalty
- Initial $1,493 · Current $896 Reduced
General-duty citation text
29 CFR 1904.41(a)(2):Annual electronic submission of OSHA Form 300A Summary of Work-Related Injuries and Illnesses by establishments with 20 or more employees but fewer than 250 employees in designated industries. If your establishment had 20 or more employees but fewer than 250 employees at any time during the previous calendar year, and your establishment is classified in an industry listed in appendix A to subpart E of this part, then you must electronically submit information from OSHA Form 300A Summary of Work-Related Injuries and Illnesses to OSHA or OSHA's designee. You must submit the information once a year, no later than the date listed in paragraph (c) of this section of the year after the calendar year covered by the form. On or about June 9, 2021, the employer did not electronically submit information from OSHA Form 300A Summary of Work-Related Injuries and Illnesses to OSHA or the OSHA's designee.
Recent events (2)
- — I (O) $895.8
- — Z (O) $1493
More inspections at Atco Products, INC.
View Atco Products, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 336390)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345367486.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.