Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: HENRY COMPANY LLC

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of HENRY COMPANY LLC in 3802 MILLER PARK DRIVE, GARLAND, TX 75042 (NAICS 324122). OSHA activity number 345378269.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Henry Company LLC — free Get an email when a new federal OSHA severe-injury report for Henry Company LLC is published. One employer, no account, unsubscribe in one click.
Establishment
HENRY COMPANY LLC
Site address
3802 MILLER PARK DRIVE
City
GARLAND
State
TX
ZIP
75042
Mailing
3802 MILLER PARK DRIVE, GARLAND, TX 75042
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
324122
Employees
62
Ownership type
A

4 citations on file for this inspection.

1910.147 C04 I

Other-than-serious Gravity 10 1 instance 4 exposed
Issued
Dec 8, 2021
Abate by
Jan 17, 2023
Penalty
Initial $13,653 · Current $6,827 Reduced
29 CFR  1910.147(c)(4)(i):Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:  (a) Sand Return Screen of Line 4: On or about June 9, 2021 and at times prior thereto, the employer did not utilize the energy control procedures and failed to shutdown and isolate the energy to perform servicing and clearing of jams exposing employees to the hazard of moving machine parts and in-going-nip points.
Recent events (3)
  • — F (O) $6826.5
  • — C (S) $13653
  • — Z (S) $13653

1910.147 D02

Other-than-serious Gravity 10 1 instance 10 exposed
Issued
Dec 8, 2021
Abate by
Jan 17, 2023
Penalty
Initial $0 · Current $0
29 CFR  1910.147(d)(2): The machine or equipment was not turned off or shut down using the procedures established for the machine or equipment:  (a) In Sand Return Screen of Line 4-On or about June 9, 2021 the employer failed to shutdown or turn off the machine to perform servicing in accordance with their procedure, thereby exposing employees to the hazard of moving machine parts and in-going-nip points while they tried to unblock the sand return screen.
Recent events (3)
  • — F (O) $0
  • — C (S) $0
  • — Z (S) $0

1910.147 C06 I C

Other-than-serious Gravity 10 1 instance 10 exposed
Issued
Dec 8, 2021
Abate by
Jan 17, 2023
Penalty
Initial $13,653 · Current $6,827 Reduced
29 CFR  1910.147(c)(6)(i)(C):Where lockout was used for energy control, the periodic inspection did not include a review, between the inspector and each authorized employee, of that employee's responsibilities under the energy control procedure being inspected:  (a) On or about June 23, 2021 it was discovered that the periodic inspection of the employers Lock Out Tag Out Procedure (SHE Standard #S009) did not include a review between the inspector and each authorized employee.
Recent events (3)
  • — F (O) $6826.5
  • — C (S) $13653
  • — Z (S) $13653

1910.305 G02 III

Other-than-serious Gravity 5 2 instances 10 exposed
Issued
Dec 8, 2021
Penalty
Initial $9,753 · Current $4,877 Reduced
29 CFR  1910.305(g)(2)(iii):Flexible cords were not connected to devices and fittings so that tension would not be transmitted to joints or terminal screws:  (a) In the Line 4 sand sifter- On or about June 23, 2021 and at times prior thereto, it was discovered that the flexible electrical cord to the vibrator motor switch was not connected so that strain relief was provided that prevented pull from being directly transmitted to joints or terminal screws.
Recent events (3)
  • — F (O) $4876.5
  • — C (S) $9753
  • — Z (S) $9753

View Henry Company LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345378269.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.