BERWYN, IL —
OSHA Inspection: CALIBER HOLDINGS CORPORATION
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of CALIBER HOLDINGS CORPORATION in 6305 OGDEN AVE., BERWYN, IL 60402 (NAICS 811121). OSHA activity number 345422356.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CALIBER HOLDINGS CORPORATION
- Site address
- 6305 OGDEN AVE.
- City
- BERWYN
- State
- IL
- ZIP
- 60402
- Mailing
- 6305 OGDEN AVE., BERWYN, IL 60402
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 811121
- Employees
- 9
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.133 A01
- Issued
- Nov 9, 2021
- Penalty
- Initial $9,753 · Current $0 Reduced
General-duty citation text
29 CFR 1910.133(a)(1): The employer did not ensure that each affected employee uses appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation: a. On or about July 7, 2021, in the shop area, an employee was exposed to eye and face hazards when operating a Central Pneumatic Model # 68831, portable hand pneumatic abrasive wheel grinder. The employer failed to ensure that the employee wore appropriate eye and face protection when operating the abrasive wheel.
Recent events (3)
- — F (S) $0
- — C (S) $9753
- — Z (S) $9753
1910.242 A
- Issued
- Nov 9, 2021
- Abate by
- Nov 22, 2021
- Penalty
- Initial $13,653 · Current $0 Reduced
General-duty citation text
29 CFR 1910.242(a): Hand and portable powered tools or equipment were not kept in safe condition: a. On or about July 7, 2021, in the shop, the employer failed to ensure effective guarding nor the maximum operating speed of equipment and accessories was adequate on tools furnished by employees. The guarding device for the Central Pneumatic, model number 68831, portable hand pneumatic abrasive wheel grinder was not installed. Also, the maximum operating speed of abrasive wheel was exceeded by the pneumatic abrasive wheel tool. An employee was, thereby exposed to struck by hazards. b. On or about July 16, 2021, in the shop, the employer failed to ensure effective guarding on tools furnished by employees. The guarding device for the Astro Pneumatic Tool Company, Model 533ET, portable hand pneumatic abrasive wheel grinder, was not installed . An employee was, thereby exposed to struck by hazards.
Recent events (3)
- — F (S) $0
- — C (S) $13653
- — Z (S) $13653
1910.243 C04
- Issued
- Nov 9, 2021
- Abate by
- Nov 22, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.243(c)(4): The top half of the wheel of portable grinding machine(s) was not enclosed: a. On or about July 7, 2021, in the shop, the employer failed to ensure effective guarding on the Central Pneumatic, Model 68831, portable hand pneumatic abrasive wheel grinder. A guard was not installed on the grinding wheel. An employee was, thereby, exposed to struck by hazards. b. On or about July 16, 2021, in the shop, the employer failed to ensure effective guarding on the Astro Pneumatic Tool Company, Model No. 533ET, portable hand pneumatic abrasive wheel grinder used by an employee. A guard was not installed on the grinding wheel. An employee was, thereby exposed to struck by hazards.
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
1910.243 C05 I
- Issued
- Nov 9, 2021
- Abate by
- Nov 16, 2021
- Penalty
- Initial $0 · Current $14,502
General-duty citation text
29 CFR 1910.243(c)(5)(i): The spindle speed of the portable abrasive wheel tool was not checked before mounting of the wheel to be certain that it did not exceed the maximum operating speed marked on the wheel: a. On or about July 7, 2021, the employer failed to train its employee on the specific need to check the spindle speed of the portable abrasive wheel grinder before mounting of the wheel to be certain that it did not exceed the maximum operating speed marked on the wheel.
Recent events (3)
- — F (S) $14502
- — C (S) $0
- — Z (S) $0
More inspections at Caliber Holdings Corporation
View Caliber Holdings Corporation's full OSHA safety record →
More inspections in this industry (NAICS 811121)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345422356.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.