MOUNT LAUREL, NJ —
OSHA Inspection: ROOSEVELT PAPER COMPANY
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of ROOSEVELT PAPER COMPANY in ONE ROOSEVELT DRIVE, MOUNT LAUREL, NJ 08054 (NAICS 561499). OSHA activity number 345442974.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ROOSEVELT PAPER COMPANY
- Site address
- ONE ROOSEVELT DRIVE
- City
- MOUNT LAUREL
- State
- NJ
- ZIP
- 08054
- Mailing
- ONE ROOSEVELT DRIVE, MOUNT LAUREL, NJ 08054
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 561499
- Employees
- 120
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.147 C07 I
- Issued
- Dec 10, 2021
- Abate by
- Jan 7, 2022
- Penalty
- Initial $13,653 · Current $10,000 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i): The employer did not provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees. a) Roosevelt Paper Company - Throughout the Production Area: The employer did not ensure that employees that should be authorized to perform LO/TO operations were trained on all aspects of the LO/TO program and all specific procedures for each individual machine or equipment that was used by each authorized employee as part of their job duty, Occurred on or about 07/27/2021.
Recent events (3)
- — J (S) $10000
- — C (S) $13653
- — Z (S) $13653
1910.147 F03 II D
- Issued
- Dec 10, 2021
- Abate by
- Jan 7, 2022
- Penalty
- Initial $13,653 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(f)(3)(ii)(D): Each authorized employee did not affix a personal lockout or tagout device to the group lockout device before working on the machine or equipment: a) Roosevelt Paper Company - Throughout the Production Area: The Shafter Helper does not affix a personal LO/TO device when helping the machine operator with operations that required the machine to be locked out, operations include but not limited to: Unjamming operations for the Marquip Sheeter/Stacker machine Model # E707-9750, S/N 1E7078820. Occurred on or about 07/27/2021.
Recent events (3)
- — J (S) $0
- — C (S) $13653
- — Z (S) $13653
1910.212 A01
- Issued
- Dec 10, 2021
- Abate by
- Jan 7, 2022
- Penalty
- Initial $13,653 · Current $10,000 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) Roosevelt Paper Company. - Sheeter Machines area: Employees worked around unguarded areas in the back of the Marquip Sheeter/Stacker machine Model # E707-9750, S/N 1E7078820, employees were exposed to moving parts and materials (i.e. spinning paper rolls) while working near and around the unguarded areas, occurred on or about 07/27/2021. b) Roosevelt Paper Company. - Winder machines Area: Employees worked around unguarded areas of the Jagenberg Two Drum Winder, Vari-Dur Type 33-15, 30.22599-1976, employees were exposed to moving part and materials near and around the winder drive area, occurred on or about 08/02/2021. c) Roosevelt Paper Company. - Guillotine machines area: Employees are exposed to pinch points on the Dexter Lawson, Cutter/guillotine, Model # MPU-110, S/N 911102, employees were exposed to the moving Clamp while stacking, securing the product and removing excess waste, occurred on or about 08/25/2021.
Recent events (3)
- — J (S) $10000
- — C (S) $13653
- — Z (S) $13653
More inspections at Roosevelt Paper Company
View Roosevelt Paper Company's full OSHA safety record →
More inspections in this industry (NAICS 561499)
More inspections in NJ
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345442974.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.