CHETEK, WI —
OSHA Inspection: PARKER-HANNIFIN CORPORATION
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of PARKER-HANNIFIN CORPORATION in 1715 PARKER DRIVE, CHETEK, WI 54728 (NAICS 332912). OSHA activity number 345478762.
What this inspection record means
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Watch Parker-Hannifin Corporation — free
Get an email when a new federal OSHA severe-injury report for Parker-Hannifin Corporation is published. One employer, no account, unsubscribe in one click.
Where did this inspection happen?
- Establishment
- PARKER-HANNIFIN CORPORATION
- Site address
- 1715 PARKER DRIVE
- City
- CHETEK
- State
- WI
- ZIP
- 54728
- Mailing
- 1715 PARKER DRIVE, CHETEK, WI 54728
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332912
- Employees
- 180
- Ownership type
- A
Citations
10 citations on file for this inspection.
1910.106 E02 III
- Issued
- Sep 30, 2021
- Abate by
- Oct 22, 2021
- Penalty
- Initial $8,582 · Current $6,007 Reduced
General-duty citation text
29 CFR 1910.106(e)(2)(iii): "Separation and protection." Areas in which flammable liquids are transferred from one tank or container to another container were not separated from other operations in the building by adequate distance or by construction having adequate fire resistance. Drainage or other means was not provided to control spills: (a) North of machine no. 503 in the Barline area; A shelf used to store and transfer flammable liquids did not have adequate distance or fire resistant construction from an adjacent bench grinder.
Recent events (2)
- — I (S) $6007.4
- — Z (S) $8582
1910.106 E06 I
- Issued
- Sep 30, 2021
- Abate by
- Oct 22, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.106(e)(6)(i): Adequate precautions were not taken to prevent the ignition of flammable vapors from sources such as open flames; lightning; smoking; cutting and welding; hot surfaces; frictional heat; static, electrical, and mechanical sparks; spontaneous ignition, including heat-producing chemical reactions; and radiant heat: (a) North of machine no. 503 in the Barline area; A shelf used to store and transfer flammable liquids was adjacent to a bench grinder without adequate fire protection precautions.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.252 A02 III A 1
- Issued
- Sep 30, 2021
- Abate by
- Oct 22, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.252(a)(2)(iii)(A)(1): The employer did not provide fire watchers whenever welding or cutting was performed, where appreciable combustible material in building construction or contents was closer than 35 feet (10.7 m) to the point of operation: (a) North of machine no. 503 in the Barline area; A fire watch was not present when using the bench grinder adjacent to a shelf used to store and transfer flammable liquids without adequate fire protection precautions.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.106 E09 III
- Issued
- Sep 30, 2021
- Abate by
- Oct 22, 2021
- Penalty
- Initial $8,582 · Current $0 Reduced
General-duty citation text
29 CFR 1910.106(e)(9)(iii): Combustible waste material and residues in a building or unit operating area were not kept to a minimum, stored in covered metal receptacles and disposed of daily: (a) North of machine no. 503 in the Barline area; Oil covered shop rags, kept in a metal oil rag station, were not disposed of daily.
Recent events (2)
- — I (S) $0
- — Z (S) $8582
1910.215 A04
- Issued
- Sep 30, 2021
- Abate by
- Oct 22, 2021
- Penalty
- Initial $6,436 · Current $4,505 Reduced
General-duty citation text
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: (a) South of machine no. 131 in the CNC area; The abrasive wheel of the Baldor pedestal grinder was not within the one eighth inch tolerance of the work rest.
Recent events (2)
- — I (S) $4505.2
- — Z (S) $6436
1910.215 B09
- Issued
- Sep 30, 2021
- Abate by
- Oct 22, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: (a) South of machine no. 131 in the CNC area; The abrasive wheel of the Baldor pedestal grinder was not within the one fourth inch tolerance of the tongue guard. (b) North of machine no. 503 in the Barline area; The abrasive wheel of the Dayton 7" bench grinder was not within the one fourth inch tolerance of the tongue guard.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 D03
- Issued
- Sep 30, 2021
- Abate by
- Nov 22, 2021
- Penalty
- Initial $13,653 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(d)(3): All energy isolating devices that were needed to control the energy to the machine or equipment were not physically located and operated in such a manner as to isolate the machine or equipment from the energy source(s): (a) East Barline area, Screw Machine No. 595045; Energy isolating device(s) were not operated in such a manner as to isolate energy source(s) prior to performing service and/or maintenance work, including but not limited to setup and tooling changes. (b) CNC area, CNC Machine No. 520140 and 520150; Energy isolating device(s) were not operated in such a manner as to isolate energy source(s) prior to performing service and/or maintenance work, including but not limited to setup and tooling changes.
Recent events (2)
- — I (S) $0
- — Z (S) $13653
1910.147 D04 I
- Issued
- Sep 30, 2021
- Abate by
- Nov 22, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(d)(4)(i): Lockout or tagout devices were not affixed to each energy isolating device by authorized employees: (a) East Barline area, Screw Machine No. 595045; Lockout or tagout device(s) were not affixed to the energy isolation device(s) by authorized employee(s) prior to performing service and/or maintenance work, including but not limited to setup and tooling changes. (b) CNC area, CNC Machine No. 520140 and 520150; Lockout or tagout device(s) were not affixed to the energy isolation device(s) by authorized employee(s) prior to performing service and/or maintenance work, including but not limited to setup and tooling changes.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.157 C01
- Issued
- Sep 30, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.157(c)(1): Portable fire extinguishers were not mounted, located and identified so that they were readily accessible without subjecting the employees to injuries: (a) North of machine no. 503 in the Barline area; A portable fire extinguisher mounted on a column was obstructed and not readily accessible.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.1200 F06 II
- Issued
- Sep 30, 2021
- Abate by
- Oct 22, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(f)(6)(ii): Except as provided in 29 CFR 1910.1200(f)(7) and 29 CFR 1910.1200(f)(8), the employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the product identifier and words, pictures, symbols, or combination thereof, which provide at least general information regarding the hazards of the chemicals and which, in conjunction with the other information immediately available to employees under the hazard communication program, would provide employees with the specific information regarding the physical and health hazards of the hazardous chemical (a) Barline area; Labels to communicate physical and/or health hazards to employees were not affixed to workplace containers that contained hazardous chemicals including eye glass cleaner and oil.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Parker-Hannifin Corporation
Mar 31, 2026
WOBURN, MA
Oct 13, 2025
LAKEVIEW, MI
Sep 25, 2024
WASHINGTON, MO
Jan 17, 2024
MCCOOK, NE
Dec 19, 2023
GREENFIELD, TN
View Parker-Hannifin Corporation's full OSHA safety record →
More inspections in this industry (NAICS 332912)
May 28, 2026
Global, Incorporated · SOMERSET, PA
Apr 13, 2026
Spiral Industries INC · HOWELL, MI
Mar 26, 2026
Baski Water Instruments, INC. · ENGLEWOOD, CO
Mar 23, 2026
Nott Company · KAUKAUNA, WI
Mar 23, 2026
Nott Company · KAUKAUNA, WI
More inspections in WI
Jul 17, 2026
PTS Contractors, INC. · GREEN BAY, WI
Jul 16, 2026
Miron Construction CO. INC. · WAUSAU, WI
Jul 15, 2026
Wabash National Services, L.P. · ELROY, WI
Jul 15, 2026
Kings Superior Construction LLC · SUSSEX, WI
Jul 15, 2026
Teronomy Builders, INC. · DELAVAN, WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345478762.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.