Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: JACOB A. WEAVER COMPANY, INC.

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of JACOB A. WEAVER COMPANY, INC. in 30777 GUYS MILLS RD., GUYS MILLS, PA 16327 (NAICS 321113). OSHA activity number 345488019.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Jacob a. Weaver Company, INC. — free Get an email when a new federal OSHA severe-injury report for Jacob a. Weaver Company, INC. is published. One employer, no account, unsubscribe in one click.
Site address
30777 GUYS MILLS RD.
City
GUYS MILLS
State
PA
ZIP
16327
Mailing
7033 ROUTE 173, COCHRANTON, PA 16314
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
321113
Employees
15
Ownership type
A

3 citations on file for this inspection.

1910.212 A01

Serious Gravity 5 1 instance 2 exposed
Issued
Jan 19, 2022
Abate by
Feb 7, 2022
Penalty
Initial $12,307 · Current $10,300 Reduced
29 CFR  1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:   A) Jacob A. Weaver on or about August 05, 2021 at the address of 30777 Guys Mills Rd., Townville, Pa: The notching machine was operated without proper machine guarding in place. Employees swing open a guard during normal operation, to allow the employee  to clear a fallen board in the start-up process, exposing employees to moving parts hazards.  An employee suffered a finger amputation.
Recent events (2)
  • — I (S) $10300
  • — Z (S) $12307

1910.147 D

Serious Gravity 5 1 instance 2 exposed
Issued
Jan 19, 2022
Abate by
Feb 7, 2022
Penalty
Initial $0 · Current $0
29 CFR  1910.147(d): The established procedure for the application of energy control (the lockout or tagout procedures) did not cover the actions listed in and was not done in sequence as required by 29 CFR 1910.147(d)(1)-(6).   A) Jacob A. Weaver on or about August 05, 2021 at the address of 30777 Guys Mills Rd., Townville, Pa:  An employee did not utilize lockout/tagout  during servicing and maintenance of the machine. The employee did not lockout the machine before picking up a fallen board in and around the danger zone area. resulting in an amputation.  An employee suffered a finger amputation.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.303 G01

Serious Gravity 1 1 instance 4 exposed
Issued
Jan 19, 2022
Abate by
Feb 7, 2022
Penalty
Initial $6,153 · Current $1,000 Reduced
29 CFR  1910.303(g)(1):Sufficient access and working space was not provided and maintained about all electric equipment (operating at 600 volts, nominal, or less to ground) to permit ready and safe operation and maintenance of such equipment:  A) Jacob A. Weaver on or about August 19, 2021 at the address of 30777 Guys Mills Rd., Townville, Pa: The area in front of the electrical panel did not allow enough room for access or work space. The panel had a transfer table roughly 14 inches from the front of the panel . Employees use this transfer table to stack wood during normal operation.   B) Jacob A. Weaver on or about August 19, 2021 at the address of 30777 Guys Mills Rd., Townville, Pa:  The area in front of the electrical disconnect box did not allow enough room for access or work space. The panel had a transfer table roughly 14 inches from the front of the disconnect. Employees use this transfer table to stack wood during normal operation.
Recent events (2)
  • — I (S) $1000
  • — Z (S) $6153

View Jacob a. Weaver Company, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345488019.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.