Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: MAXIMUM CONTRACTOR CORP.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of MAXIMUM CONTRACTOR CORP. in 3110 GROVE COURT, MECHANICSBURG, PA 17055 (NAICS 238160). OSHA activity number 345507347.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Maximum Contractor Corp. — free Get an email when a new federal OSHA severe-injury report for Maximum Contractor Corp. is published. One employer, no account, unsubscribe in one click.
Site address
3110 GROVE COURT
City
MECHANICSBURG
State
PA
ZIP
17055
Mailing
238 ORCHARD STREET, ELIZABETH, NJ 07208
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238160
Employees
40
Ownership type
A

4 citations on file for this inspection.

1926.503 A01

Serious Gravity 5 1 instance 3 exposed
Issued
Jan 19, 2022
Abate by
Feb 7, 2022
Penalty
Initial $7,977 · Current $7,977
29 CFR  1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:   (a) 3110 Grove Court Mechanicsburg, PA - The employer did not ensure  employees  were trained to recognize the hazards of falling and the equipment and procedures to use to minimize those hazards, exposing employees fall hazards, on or about August 31, 2021.  Abatement certification required within 10 days after abatement date.  The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (1)
  • — Z (S) $7977

1926.1051 A

Serious Gravity 10 1 instance 3 exposed
Issued
Jan 19, 2022
Abate by
Feb 7, 2022
Penalty
Initial $11,167 · Current $11,167
29 CFR 1926.1051(a): Stairways or ladders were not provided at all personnel points of access where there was a break in elevation of 19 inches:  (a) 3110 Grove Court Mechanicsburg, PA - Employees used  a 6 foot Warner stepladder in a closet to access the top of a trusses/decking on a residential home with a break in elevation of 2 feet from the top of the ladder to the top of the truss and decking,  exposing employees to a fall hazard, on or about  August 31, 2021.  Abatement certification and documentation required within 10 days after abatement date. The certification shall include a statement that abatement is complete, the date and method of abatement, and state that employees and their representatives were informed of this abatement. Abatement documentation shall include documents demonstrating that abatement is complete, such as evidence of the purchase or repair of equipment, photographic or video evidence of abatement or other written records.
Recent events (1)
  • — Z (S) $11167

1926.1053 B13

Serious Gravity 5 1 instance 3 exposed
Issued
Jan 19, 2022
Abate by
Feb 7, 2022
Penalty
Initial $0 · Current $0
29 CFR 1926.1053(b)(13): The top or top step of a stepladder was used as a step:  (a)  3110 Grove Court Mechanicsburg, PA - Employees used  a six foot Warner stepladder and were stepping on the top step of the ladder to gain access the top of the trusses and floor decking on a residential home,  exposing employees to a fall hazard, on or about August 31, 2021.  Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (1)
  • — Z (S) $0

1926.501 B13

Repeat Gravity 10 1 instance 3 exposed
Issued
Jan 19, 2022
Abate by
Feb 7, 2022
Penalty
Initial $22,333 · Current $22,333
29 CFR 1926.501(b)(13): Each employee engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system:  (a) 3110 Grove Court Mechanicsburg, PA - Employees  performed residential framing work and installing decking activities 13 feet above the ground without the benefit of a fall protection system, exposing employees to a fall hazard, on or about August 31, 2021.  Maximum Contractors Corporation  was  cited for a violation of this Occupational Safety and Health Standard 29 CFR 1926.501(b)(13), which was contained in OSHA inspection number 1530118, citation number 1, item number 1 and was affirmed as a final order on September 10, 2021, with respect to a workplace located at 2&4 Maplewood , Lakewood NJ, 08710.   Abatement certification and documentation required within 10 days after abatement date. The certification shall include a statement that abatement is complete, the date and method of abatement, and state that employees and their representatives were informed of this abatement. Abatement documentation shall include documents demonstrating that abatement is complete, such as evidence of the purchase or repair of equipment, photographic or video evidence of abatement or  written records.
Recent events (1)
  • — Z (R) $22333

View Maximum Contractor Corp.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345507347.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.