LIBERTYVILLE, IL —
OSHA Inspection: EHC INDUSTRIES, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of EHC INDUSTRIES, INC. in 1125 N MILWAUKEE AVE, LIBERTYVILLE, IL 60048 (NAICS 562910). OSHA activity number 345515563.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- EHC INDUSTRIES, INC.
- Site address
- 1125 N MILWAUKEE AVE
- City
- LIBERTYVILLE
- State
- IL
- ZIP
- 60048
- Mailing
- 366 HOLLOW HILL DR., WAUCONDA, IL 60084
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 562910
- Employees
- 12
- Ownership type
- A
Citations
5 citations on file for this inspection.
1926.404 F06
- Issued
- Nov 22, 2021
- Abate by
- Dec 3, 2021
- Penalty
- Initial $6,383 · Current $0 Reduced
General-duty citation text
29 CFR 1926.404(f)(6): The path to ground from circuits, equipment, or enclosures was not permanent and continuous: a) On September 3, 2021, employees were using an MQ Power DCA70SSIU4F portable generator that was not equipped with a grounding rod. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (S) $0
- — Z (S) $6383
1910.178 L04 III
- Issued
- Nov 22, 2021
- Abate by
- Dec 17, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.602(d): Note: The requirements applicable to construction work under paragraph (d) of this section are identical to those set forth at paragraph (l) of 29 CFR 1910.178: 29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years: a) On or about September 3, 2021, the employer did not ensure that each powered industrial truck operator's performance was evaluated at least once every three years. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (O) $0
- — Z (O) $0
1926.503 B01
- Issued
- Nov 22, 2021
- Abate by
- Dec 17, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.503(b)(1): The employer did not verify compliance with paragraph (a) of this section by preparing a written (training) certification record including the name or other identity of the employee trained, the date(s) of the training, and the signature of the person who conducted the training or the signature of the employer: a) On or about September 3, 2021, the employer did not maintain records or certification of fall protection training for employees exposed to fall hazards. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (O) $0
- — Z (O) $0
1926.405 G02 IV
- Issued
- Nov 22, 2021
- Penalty
- Initial $0 · Current $1,720
General-duty citation text
29 CFR 1926.405(g)(2)(iv): Flexible cords were not connected to devices and fittings so that strain relief is provided to prevent pull from being directly transmitted to joints or terminal screws: a) On September 3, 2021, electric cables connected to a portable generator were not equipped with strain relief. No abatement certification or documentation is required for this item.
Recent events (2)
- — I (O) $1720
- — Z (S) $0
1926.416 E01
- Issued
- Nov 22, 2021
- Penalty
- Initial $0 · Current $1,720
General-duty citation text
29 CFR 1926.416(e)(1): Worn or frayed electric cords or cables were used: a) On September 3, 2021, the outer insulation for the electric cables connected to a portable generator was damaged and did not fully enclose the insulated wires. No abatement certification or documentation is required for this item.
Recent events (2)
- — I (O) $1720
- — Z (S) $0
More inspections at EHC Industries, INC.
View EHC Industries, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 562910)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345515563.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.