Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: PROFESSIONAL FRAMING SYSTEMS, LLC

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of PROFESSIONAL FRAMING SYSTEMS, LLC in 1330 UNION AVE, LACONIA, NH 03246 (NAICS 238130). OSHA activity number 345563423.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Professional Framing Systems, LLC — free Get an email when a new federal OSHA severe-injury report for Professional Framing Systems, LLC is published. One employer, no account, unsubscribe in one click.
Site address
1330 UNION AVE
City
LACONIA
State
NH
ZIP
03246
Mailing
41 TREATY COURT UNIT 4, FREMONT, NH 03044
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
18
Ownership type
A

8 citations on file for this inspection.

1926.20 B02

Serious Gravity 5 1 instance 18 exposed
Issued
Nov 9, 2021
Abate by
Nov 30, 2021
Penalty
Initial $4,291 · Current $2,100 Reduced
29 CFR  1926.20(b)(2):The employer did not initiate and maintain programs which provided for frequent and regular inspections of the job site, materials and equipment to be made by a competent person(s):  Site- Employees were not protected from fall, struck by, and trip hazards where the competent person did not conduct inspections of the worksite for hazardous conditions and take prompt corrective action when required.
Recent events (2)
  • — I (S) $2100
  • — Z (S) $4291

1926.100 A

Serious Gravity 5 1 instance 17 exposed
Issued
Nov 9, 2021
Penalty
Initial $4,291 · Current $0 Reduced
29 CFR  1926.100(a): Employees were not protected by protective helmets while working in areas where there was a possible danger of head injury from impact, or from falling or flying objects, or from electrical shock and burns:   Site- Employees were not protected from head injuries where head protection was not worn at the site.
Recent events (2)
  • — I (S) $0
  • — Z (S) $4291

1926.102 A01

Serious Gravity 5 1 instance 3 exposed
Issued
Nov 9, 2021
Abate by
Nov 30, 2021
Penalty
Initial $4,291 · Current $0 Reduced
29 CFR  1926.102(a)(1): Eye and face protective equipment were not used when machines or operations presented potential eye or face injury from physical agents:  Building 3- Employees operating pneumatic nail guns and circular saws were not protected from eye injuries where eye protection was not worn.
Recent events (2)
  • — I (S) $0
  • — Z (S) $4291

1926.501 B01

Serious Gravity 10 1 instance 12 exposed
Issued
Nov 9, 2021
Penalty
Initial $6,007 · Current $3,000 Reduced
29 CFR  1926.501(b)(1): Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems.   Building 3- Employees working from the third floor were not protected from fall of approximately 23 feet where fall protection was not utilized.
Recent events (2)
  • — I (S) $3000
  • — Z (S) $6007

1926.501 B04 I

Serious Gravity 5 1 instance 12 exposed
Issued
Nov 9, 2021
Penalty
Initial $4,291 · Current $0 Reduced
29 CFR  1926.501(b)(4)(i): Each employee on walking/working surfaces was not protected from falling through holes (including skylights) more than 6 feet (1.8 m) above lower levels, by personal fall arrest systems, covers, or guardrail systems erected arou   Building 3- Employees working from the third floor were not protected from fall of approximately 12 feet, through the unguard elevator shaft opening, where fall protection was not utilized.
Recent events (2)
  • — I (S) $0
  • — Z (S) $4291

1926.502 I03

Serious Gravity 5 1 instance 12 exposed
Issued
Nov 9, 2021
Abate by
Nov 26, 2021
Penalty
Initial $0 · Current $0
29 CFR  1926.502(i)(3): All covers were not secured when installed so as to prevent accidental displacement by the wind, equipment, or employees:   Building 3- The elevator shaft opening the the second floor with OSB sheathing that was not secured to prevent accidental displacement.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.502 I04

Serious Gravity 5 1 instance 12 exposed
Issued
Nov 9, 2021
Abate by
Nov 26, 2021
Penalty
Initial $0 · Current $0
29 CFR  1926.502(i)(4): All covers were not color coded or marked with the word "HOLE" or "COVER" to provide warning of the hazard:   Building 3- The elevator shaft opening the the second floor with OSB sheathing and was not marked hole or cover.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.1052 C01 I

Serious Gravity 1 1 instance 12 exposed
Issued
Nov 9, 2021
Penalty
Initial $2,574 · Current $1,400 Reduced
29 CFR  1926.1052(c)(1)(i): Stairways having four or more risers or rising more than 30 inches (76 cm), whichever is less, were not equipped with at least one handrail:   Building 3- Employees using the exterior stair to enter the building or the interior stair to access the second and third floor were not protected from a trip hazard where handrails were not installed.
Recent events (2)
  • — I (S) $1400
  • — Z (S) $2574

View Professional Framing Systems, LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345563423.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.