Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: UMANZOR FRAMING LLC

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of UMANZOR FRAMING LLC in 350 N. MILWAUKEE STREET, DENVER, CO 80206 (NAICS 238130). OSHA activity number 345570808.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Umanzor Framing LLC — free Get an email when a new federal OSHA severe-injury report for Umanzor Framing LLC is published. One employer, no account, unsubscribe in one click.
Establishment
UMANZOR FRAMING LLC
Site address
350 N. MILWAUKEE STREET
City
DENVER
State
CO
ZIP
80206
Mailing
1840 S SAULSBURY CT, LAKEWOOD, CO 80232
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Last modified
Data loaded
NAICS code
238130
Employees
7
Ownership type
A

6 citations on file for this inspection.

1903.19 C01

Other-than-serious 1 instance 1 exposed
Issued
Aug 22, 2022
Abate by
Sep 26, 2022
Penalty
Initial $349 · Current $349
29 CFR  1903.19(c)(1):The employer did not certify to OSHA, within 10 calendar days after the abatement date, that the cited violation had been abated:  Abatement certification for Citation 001, Item 001, Citation 001, Item 002, Citation 001, Item 003, Citation 001, Item 004a, and Citations 1, Item 004b with a final order date of 4/28/2022 was not received within 10 calendar days (by 5/20/2022) following the abetment due date (5/6/2022).
Recent events (1)
  • — Z (O) $349

1926.501 B01

Serious Gravity 10 1 instance 7 exposed
Issued
Apr 1, 2022
Abate by
May 6, 2022
Penalty
Initial $4,351 · Current $4,351
29 CFR  1926.501(b)(1): "Unprotected sides and edges." Each employee on a walking/working surface (horizontal and vertical surface) with an unprotected side or edge which is 6 feet (1.8 m) or more above a lower level shall be protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems.   On and about October 7, 2021,  employees engaged in construction activities were not protected from fall hazards by conventional fall protection and/or safety devices  (e.g.: guardrail systems, safety net system, or personal fall arrest system).   An employee in the process of installinga framed wall section(s) of a residential property located at 350 N. Milwaukee Street in Denver, CO stepped backwards and fell approximately 30 feet  through an open stairwell shaft  on the second floor of the structure to the basement below.
Recent events (1)
  • — Z (S) $4351

1926.501 B04 I

Serious Gravity 10 1 instance 7 exposed
Issued
Apr 1, 2022
Abate by
May 6, 2022
Penalty
Initial $4,351 · Current $4,351
29 CFR  1926.501(b)(4)(i): Each employee on walking/working surfaces was not protected from falling through holes (including skylights) more than 6 feet (1.8 m) above lower levels, by personal fall arrest systems, covers, or guardrail systems erected around such holes:  On and about October 7, 2021, employees in the process of completing the framework for several residential properties were not protected from falling hazards by a personal fall arrest systems, covers, or guardrail systems erected around such holes.  An employee in the process of installing the  framed wall sections of a residential property located at 350 N. Milwaukee Street in Denver, CO stepped backwards, and fell approximately 30 feet  through an open stairwell shaft to the concrete basement below.
Recent events (1)
  • — Z (S) $4351

1926.501 C01

Serious Gravity 10 1 instance 7 exposed
Issued
Apr 1, 2022
Abate by
May 6, 2022
Penalty
Initial $4,351 · Current $4,351
29 CFR  1926.501(c)(1): When employees were exposed to falling objects, the employer did not have each employee wear a hard hat and did not erect toeboards, screens, canopy structures or barricades to prevent objects from falling from higher levels:  On and about October 7, 2021, employees were not protected from struck by hazards in that toe-board used to prevent objects such as, but not limited to, powered tools and/or other materials used during construction activities were not installed.
Recent events (1)
  • — Z (S) $4351

1926.503 A01

Serious Gravity 5 1 instance 7 exposed
Issued
Apr 1, 2022
Abate by
May 6, 2022
Penalty
Initial $3,729 · Current $3,729
29 CFR  1926.503(a)(1): The employer did not provide a fall protection training program for each employee who might be exposed to fall hazards:  On and about October 7, 2021, although conventional fall protection and /or safety devices (e.g.: harnesses, lanyards, anchors points, etc.) were available at the site location, the employer failed to train employees on how to properly don the protective equipment and of the hazards associated falls.
Recent events (1)
  • — Z (S) $3729

1926.503 A02 III

Serious Gravity 5 1 instance 7 exposed
Issued
Apr 1, 2022
Abate by
May 6, 2022
Penalty
Initial $0 · Current $0
29 CFR  1926.503(a)(2)(iii): The employer did not assure that each employee has been trained, as necessary, by a competent person in the use and operation of guardrail systems, personal fall arrest systems, safety net systems, warning line systems, safety monitoring systems, controlled access zones, and other protection to be used:  On and about October 7, 2021, training to ensure that employees were familiar with and maintained a level of competency with the  company's fall protection program was not completed/conducted by a competent person. Employees did not know how to use and/or operate guardrails and the fall protection harnesses.
Recent events (1)
  • — Z (S) $0

View Umanzor Framing LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345570808.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.