GASSVILLE, AR —
OSHA Inspection: AMERICAN STITCHCO INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of AMERICAN STITCHCO INC. in 801 LAKEVIEW DR, GASSVILLE, AR 72365 (NAICS 314999). OSHA activity number 345585905.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- AMERICAN STITCHCO INC.
- Site address
- 801 LAKEVIEW DR
- City
- GASSVILLE
- State
- AR
- ZIP
- 72365
- Mailing
- 4662 HIGHWAY 62 W, MOUNTAIN HOME, AR 72653
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 314999
- Employees
- 83
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.212 B
- Issued
- Apr 5, 2022
- Penalty
- Initial $14,502 · Current $10,877 Reduced
General-duty citation text
29 CFR 1910.212(b): Machine(s) designed for fixed location(s) were not securely anchored to prevent walking or moving: In the workshop, the following blower machines designed to be bolted to the floor were not anchored: a) Blower Machine #1, Wise Feeder, Serial Numbers: NC6597/WK4X36, Drum Model VWOX36, Feeder Model NC6596, manufactured 2003. b) Blower Machine #2, Wise Feeder, Serial Number: NC4013, Drawing Number: D10945, manufactured 1992. c) Blower Machine # 3, Lumus Feeder, Wise Control Panel, Serial Number: 3692, Drawing Number: D10828, manufactured 1991; Carolina Blower Corp Nozzle Blower, Serial Number: B9445, Model Number: 30656D; Wise Feeder Bed, Serial Number: 3675, Model Number: EX-36X6. d) Blower Machine #4, Wise Feeder, Serial Number: 1564/01, Panel Model Number: NC6339, manufactured 2001.
Recent events (2)
- — I (S) $10876.5
- — Z (S) $14502
1910.219 C04 I
- Issued
- Apr 5, 2022
- Penalty
- Initial $10,360 · Current $7,770 Reduced
General-duty citation text
29 CFR 1910.219(c)(4)(i): Unguarded projecting shaft end(s) did not present a smooth edge and end and projected more than one half the diameter of the shaft: The employer did not ensure that projecting and rotating shaft ends on two Blower Machines in the Workshop department were guarded with non-rotating cap or safety sleeve: a) On each side of Blower Machine #1, rotating shaft ends approximately 1.3-inch in diameter that projected approximately 3.2-inches, were not guarded. b) On each side of Blower Machine #4, rotating shaft ends approximately 1.4-inch in diameter that projected approximately 2.8-inches, were not guarded.
Recent events (2)
- — I (S) $7770
- — Z (S) $10360
1910.147 C04 I
- Issued
- Apr 5, 2022
- Abate by
- Apr 29, 2022
- Penalty
- Initial $145,027 · Current $145,027
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: On or about October 5, 2021, at the blower machines, employees were engaged in servicing and maintenance activities such as, but not limited to cleaning out fiber materials from the drum areas of machines such as but not limited to Blower Machine #3. Machine specific energy control procedures were not developed, documented, or utilized.
Recent events (2)
- — I (R) $145027
- — Z (W) $145027
1904.30 A
- Issued
- Apr 5, 2022
- Abate by
- Apr 29, 2022
- Penalty
- Initial $2,072 · Current $2,072
General-duty citation text
29 CFR 1904.30(a): The employer did not keep a separate OSHA 300 Log for each establishment that is expected to be in operation for one year or longer. On or about October 5, 2021, at the Gassville and Yellville facilities, separate injury and illness logs were not kept for each facility.
Recent events (2)
- — I (O) $2072
- — Z (O) $2072
More inspections at American Stitchco INC.
View American Stitchco INC.'s full OSHA safety record →
More inspections in this industry (NAICS 314999)
More inspections in AR
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345585905.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.