FRANKLIN PARK, IL —
OSHA Inspection: R.C.M. INDUSTRIES, INC. DBA AALLIED DIE CASTING COMPANY OF ILLINOIS
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of R.C.M. INDUSTRIES, INC. DBA AALLIED DIE CASTING COMPANY OF ILLINOIS in 3021 CULLERTON DR., FRANKLIN PARK, IL 60131 (NAICS 331523). OSHA activity number 345654974.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Site address
- 3021 CULLERTON DR.
- City
- FRANKLIN PARK
- State
- IL
- ZIP
- 60131
- Mailing
- 3021 CULLERTON DR., FRANKLIN PARK, IL 60131
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 331523
- Employees
- 150
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.133 A01
- Issued
- Apr 29, 2022
- Abate by
- May 25, 2022
- Penalty
- Initial $9,324 · Current $8,000 Reduced
General-duty citation text
29 CFR 1910.133(a)(1): The employer did not ensure that each affected employee uses appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation: a) Die Cast Department- On or about November 15, 2021, the employer did not require the use of the appropriate face protection, such as a face shield, for employees who were exposed to splash hazards to eyes and face when working with chemicals, such as hot Heat Slick 200 oil and nitrogen. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement or other written records.
Recent events (2)
- — I (S) $8000
- — Z (S) $9324
1910.147 C04 II B
- Issued
- Apr 29, 2022
- Abate by
- May 25, 2022
- Penalty
- Initial $13,052 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(ii)(B): The energy control procedures did not clearly and specifically identify procedural steps for shutting down, isolating, blocking and securing machines or equipment to control hazardous energy: a) Die Cast Department -On or about November 15, 2021, the employer did not ensure that the established energy control procedures for the portable Regloplas Hot Oil machine, clearly outlined specific procedural steps for testing the machine to determine and verify the effectiveness of the lockout devices and other energy control measures applied for electrical and thermal energy sources, prior to initiating servicing and maintenance activities. The established procedure did not include steps for shutting down, isolating and securing the machine to control all hazardous energy on the Regloplas Hot Oil machine, including electrical, thermal, and chemical, procedural steps for the placement and removal of lockout/tagout devices, or specific requirements for testing the machine to determine and verify the effectiveness of the lockout devices and other energy control measures. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement or other written records.
Recent events (2)
- — I (S) $0
- — Z (S) $13052
1910.147 C05 I
- Issued
- Apr 29, 2022
- Abate by
- May 25, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(5)(i): Locks, tags, chains, wedges, key blocks, adapter pins, self-locking fasteners, or other hardware were not provided by the employer for isolating, securing or blocking of machines or equipment from energy sources: a) Die Cast Department - On or about November 15, 2021, the employer did not provide effective means or equipment to isolate, secure or block hazardous energy sources, such as the ball valve on the portable Regloplas Hot Oil machine. Employees were exposed to the accidental release of hot oil. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement or other written records.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at R.C.M. Industries, INC. DBA Aallied DIE Casting Company of Illinois
View R.C.M. Industries, INC. DBA Aallied DIE Casting Company of Illinois's full OSHA safety record →
More inspections in this industry (NAICS 331523)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345654974.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.